RF-CC1310-AT Multifunction radio modem AT command RF-CC1310-AT is a radio modem multifunction usable with AT commands. Functionality: - Radio Modem with AT Command (Transparent Transmission Protocol) The RF modem is very simple to use and provides a wireless RS232 link with a RF data rate of up to 200kbps (2-GFSK modulation). The transceivers has the functions of a complete radio modem and simply require CMOS/TTL data at the transmit input and the corresponding transceiver(s) output the same data. Preamble and CRC are automatically generated and added to the RF transmission. - Over The Air Command (OTA Command) The module has the ability to manage No. 2 digital outputs and No. 2 digital inputs both locally and remotely (OTA Command) by sending simple AT commands. With this function, when a digital input change status a message will be transmitted via UART to the remote device : “Alarm 0 1 ” Remote I/O functionality, this is a type of transmission bidirectional used in the field of automatic controls. When you enable this, every time the digital input changes state on station A, also the digital output of remote station B it will reflect these states simultaneously and vice versa. The hardware is based on the module RF-CC1310 designed by RadioControlli (CC1310 based from Texas Instruments). For more information and details, please refer to : • Smart meters • Wireless security systems • Home and Building automation • Automatic Measure Reading • Low-Power Wireless Systems Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice. • Wireless Sensor Networks • Remote Control • Street Lights System • Parking Sensors • Environmental Sensors • Smart Grid and Automatic Meter Reading

Multifunction radio modem AT command (*) Programmable parameter. - 128KB of On-System Programming Flash - 8KB of SRAM for Cache (or as General-Purpose RAM) - 20KB of Ultralow Leakege SRAM - Support Over-the-Air Upgrade (OTA) Block Diagram AntennaPAD Filter Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

Multifunction radio modem AT command Radio|toiitrolliWIRELESS MODULESReference Schematics 17 RF-OUT Mechanical Dimension 0.4mm r(3.0 mm) Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

Multifunction radio modem AT command GND RFOUT GND DIN 1 DIN 0 FACTORY STATUS OUT 1 RESET Pin Number Name Pin Type Description Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

Multifunction radio modem AT command 13.0 mm Recommended Reflow Profile for Lead Free Solder250 2 30* C or higher 190 C 150 C TQ to rC. 5 FTe-heatiog Zons [3“C to 6#C/s) Soktefirig Zurie Heating time Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

r rRF-CC1310-AT Multifunction radio modem AT command AT command is based on ASCII code. Request message: AT+<CMD>[OP][parameter-1,parameter-2,...,parameter-n]<CR><LF> The default UART baudrate is 115200bps. Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

RF-CC1310-AT Multifunction radio modem AT command Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

RF-CC1310-AT Multifunction radio modem AT command Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

Parameter Default value Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

RF-CC1310-AT Multifunction radio modem AT command AT+Sleep means that both BB (BaseBand) and RF enter the lowest power consumption state. After this command the module will no longer respond to any AT command, it will be necessary to use the wake-up pin to return to the previous conditions. Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

RF-CC1310-AT Multifunction radio modem AT command Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

RF-CC1310-AT Multifunction radio modem AT command When LpNode is turned on (enabled = 1) , when transmitting data, a longer preamble will be added to wake-up the remote receiving module. When the receiving module is receiving a sleep wake-up reception mechanism will be used to reduce average power consumption. Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.