*mydirectindustry

RC-RFSK3-868

Product catalog summary

Overview: The RC-RFSK3-868 is an FSK Radio Receiver Module designed by Radiocontrolli s.r.l. It features a PLL Synthesizer and crystal oscillator, suitable for applications such as wireless security systems, home automation, automatic meter reading, and wireless sensor networks.

Technical Specifications:

Frequency: 868.35 MHz
RF Sensitivity: 100 dBm
Supply Voltage: 4.5 to 5.5 Vdc
Supply Current (Operation mode): 5.7 mA
Supply Current (Shut down mode): 100 nA
Max Data Rate: 4.8 Kbit/s
3dB Bandwidth: 6.8 KHz
Operating Temperature Range: -25 to +80 °C
Power Up Time (from Power to stable data): 8 ms
Power Up Time (from PD to stable data): 5 ms

Pin Description:

ANT: External Antenna
GND: Ground
PD: Power Down
RSSI: Received Signal Strength Output
VCC: Power
AF: AF Output
OUT: Data Out

Mechanical Dimensions: The module measures 46mm x 16.4mm with a pin spacing of 2.54mm.

RSSI Output: The RSSI provides a DC Voltage proportional to the peak value of the received data signal, useful for wake-up circuits and other applications. The RSSI voltage varies with the RF input signal strength, ranging from 1.20 Volt at -120 dBm to 2.75 Volt at -40 dBm.

Disclaimer: Radiocontrolli s.r.l disclaims responsibility for irregular uses of the devices and reserves the right to change the information without notice.

Catalog excerpts

Radio ontrolli FSK Radio Receiver Module RC-RFSK3-868 is an FSK Radio Receiver Module with PLL Synthesizer and crystal oscillator. Single Line Package with power down mode and RSSI Output. - Wireless security systems - Home and building automation - Automatic Measure Reading - Wireless Sensor Network Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for Pag- 1 / 2 any possible lack or inaccuracy of the data and reserves the right to change in whole www.raai°contr°Nl.com or in part these information without notice.

Open the catalog to page 1

adio RSSI OutputThe RSSI provides a DC Voltage proportional to the peak value of the receive data signal. This output can be used as an indicator for the received signal strength to use in wake-up circuits and other application. RF IN (dBm) Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for 2ag- 2 / 2 any possible lack or inaccuracy of the data and reserves the right to change in whole www.raai°contr°Nl.com or in part these information without notice.

Open the catalog to page 2

RC-RFSK3-868

RC-RFSK3-868

Catalog excerpts

All Radiocontrolli S.R.L. catalogs and technical brochures

Archived catalogs