Radio FSK Radio Receiver Module RF-RFSK1-XXXN is an FSK Radio Receiver Module PLL Synthesizer and crystal oscillator. Single Line Package with power down mode. Pin to pin compatible with the version denominated RC-RFSK1-XXX. Standard versions: RC-RFSK1-433N =====> Frequency 433.92MHz RC-RFSK1-868N =====> Frequency 868.35MHz Available versions : RC-RFSK1-433.42N ===> Frequency 433.42MHz RC-RFSK1-434.15N ===> Frequency 434.15MHz RC-RFSK1-434.50N ===> Frequency 434.50MHz RC-RFSK1-868.95N ===> Frequency 868.95MHz RC-RFSK1-869.50N ===> Frequency 869.50MHz Possible versions : On request we can customize the frequency value : • From 433.00 MHz to 435.00 MHz with step of 0,01 MHz • From 867.00 MHz to 870.00 MHz with step of 0,01 MHz Applications : - Wireless security systems - Home and building automation - Automatic Measure Reading - Wireless Sensor Network Technical Characteristics Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

adio Pin Description Mechanical Dimensions Pads Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

ontrolli Wireless Modules The receiver module must be powered from a regulated voltage. In proximity of the receiver module it is necessary to insert a ceramic decoupling capacitor (100nF). The ground plane must be completely encircle the entire receiver in particular the area of the Antenna connection (we recommend a minimum of 40-50mm radius). The 50ohm connection should be as short as possible. For a pcb with 1.6mm thickness, the track “50ohm connection” must be 2.5mm, this track should be separated from the GND for 2mm. On the opposite side of 50ohm connection should be a ground plane. Keep...