FSK Radio Receiver Module RC-RFSK1-433-96 is an FSK Radio Receiver Module with PLL Synthesizer and crystal oscillator. Single Line Package with power down mode. Pin to pin compatible with the version denominated RC-RFSK1-XXX. WIRELESS MODULES Applications : ■ Wireless security systems ■ Home and building automation ■ Automatic Measure Reading ■ Wireless Sensor Network Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

WIRELESS MODULES Mechanical Dimensions Pads Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

The receiver module must be powered from a regulated voltage. In proximity of the receiver module it is necessary to insert a ceramic decoupling capacitor (100nF). The ground plane must be completely encircle the entire receiver in particular the area of the Antenna connection (we recommend a minimum of 40-50mm radius). The 50ohm connection should be as short as possible. For a pcb with 1.6mm thickness, the track “50ohm connection” must be 2.5mm, this track should be separated from the GND for 2mm. On the opposite side of 50ohm connection should be a ground plane. Keep the receiver module away...