adio Multiprotocol 2.4GHz Wireless with power amplifier The RC-CC2652PA module is designed based on CC2652R and CC2592 of Texas Instruments. The RC-CC2652PA module is designed based on CC2652R and CC2592 of Texas Instruments. The CC2652R device is a multiprotocol wireless 2.4GHz MCU targeting Thread, Zigbee, Bluetooth 5 low energy, IEEE 802.15.4g, IPv6-enabled smart object (6LoWPAN), Wi-SUN, and proprietary systems. The CC2592 device is a cost effective and high performance RF front end low-power and low-voltage 2.4- Ghz wireless applications. To increase the link budget, the CC2592 device provides a power amplifier for increased output power and an LNA with a low-noise figure for improved receiver sensitivity. - ECC and RSA Public Key Hardware Accelerator - SHA2 Accelerator (Full Suite Up to SHA-512) - True Random Number Generator (TRNG) - Capacitive Sensing, Up to 8 Channels - Integrated Temperature and Battery Monitor - Wide Supply Voltage Range: 2 V to 3.6 V • Radio Section - 2.4-GHz RF Transceiver Compatible With Bluetooth 5 low energy and IEEE 802.15.4 PHY and MAC - Excellent Receiver Sensitivity: -103 dBm for Bluetooth 5 low energy Coded -Output Power Up to +20dBm - 352KB of In-System Programmable Flash - 8KB of Cache SRAM (Available as General-Purpose RAM) - 80KB of Ultra-Low Leakage SRAM - 2-Pin cJTAG and JTAG Debugging - Supports Over-the-Air Upgrade (OTA) • Ultra-Low Power Sensor Controller With 4KB of SRAM - Sample, Store, and Process Sensor Data - Operation Independent From System CPU - Fast Wake-Up for Low-Power Operation - Digital Peripherals Can be Routed to Any GPIO - 2* Comparators With Internal Reference DAC (1* Continuous Time, 1* Ultra-Low Power) - Programmable Current Source - Smart Grid and Automatic Meter Reading - Energy Harvesting Applications - Wireless Sensor Network - Electronic Shelf Label (ESL) - Home and Building Automation - Wireless Alarm and Security Systems - Wireless Healthcare Applications Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for Pag- 1 / 6 any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

Functional Block Diagram Control Logig for connecting the CC2652R to a CC2592 device.There are three digital controls pins (PA_EN, LNA_EN and HGM) on the Cc2592 that control the state of the chip. The table below shows the control logic when connecting the Cc2592 to a CC2652R device. PA_EN Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for Pag- 2 / 6 any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for Pag- 3 / 6 any possible lack or inaccuracy of the data and reserves the right to change in whole wwW.raaioconU"oNl.c;om or in part these information without notice.

adio Terminal description RC-CC2652PA Pad Number Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for Pag- 4 / 6 any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

NOTE: about the proper pin multiplexing options, please reference CC2652 datasheet from www.TI.com for more details Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for Pag- 5 / 6 any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

Radio Recommend ed PC B Lavo u t Recommended Reflow Profile for Lead Free Solder Peak temp 232 255 C 222 C Ramp up rate (to reflow) iSoldering Zone Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for Pag- 6 / 6 any possible lack or inaccuracy of the data and reserves the right to change in whole wwWTaaiocontrONI.c;om or in part these information without notice.