RC-CC1352P7 Dual band sub 1GHz and 2.4GHzRadio Transceiver +20-dBm high-power amplifier The RC-CC1352P7 module is based on Texas Instruments CC1352P7 component. Operative Frequency Bands : 868MHz - 915MHz The CC1352P7 device is a multiprotocol and multi-band Sub-1 GHz and 2.4-GHz wireless microcontroller (MCU) supporting Thread, Zigbee®, Bluetooth® 5.2 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6L0WPAN), MIOTY®, Wi-SUN®, proprietary systems. The CC1352P7 device is a member of the CC26xx and CC13xx family of cost-effective, ultra-low power, 2.4-GHz and Sub-1 GHz RF devices. Very low active RF and microcontroller (MCU) current, in addition to sub-pA sleep current with up to 80KB of RAM retention, provide excellent battery lifetime and allow operation on small coin-cell batteries and in energy-harvesting applications. The CC1352P device combines a flexible, very low-power RF transceiver with a powerful 48-MHz Arm® Cortex®-M4F CPU in a platform supporting multiple physical layers and RF standards. A dedicated Radio Controller (Arm® Cortex®-M0) handles low-level RF protocol commands that are stored in ROM or RAM, thus ensuring ultra-low power and great flexibility. The low power consumption of the CC1352P7 device does not come at the expense of RF performance; the CC1352P device has excellent sensitivity and robustness (selectivity and blocking performance). +20-dBm high-power amplifier. UA = UFL Connector SA = PCB Streap Antenna If not specified, the default version is with PCB streap antenna Applications : Feature : - Low-Power Wireless Systems - IEEE 802.15.4g mode switch support - Smart Grid and Automatic Meter Reading - Ultra Low consumption technology - Home and Building Automation - Powerful ARM Cortex - Wireless Sensor Network - Supported by the open platform Contiki 6LoWPAN. - 6LoWPAN systems - Very Small size Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

Technical Characteristics Sub 1 GHz parameters - Power ARM Cortex - M4F processor - 704Kb of On-System Programming Flash - 8KB of SRAM for Cache (or as General-Purpose RAM) - 144KB of Ultralow Leakege SRAM - Support Over-the-Air Upgrade (OTA) Technical Characteristics 2.4 Ghz parameters For more information and details, please refer to the CC1352P7 Texas Instruments datasheet. Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice....

Mechanical dimensions Sub 1GHZ (RF OUT) 2.4GHZ (PCB Antenna) 1.27mm Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

Pin out device Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

RC-CC1352P7 Adapter board To make immediate usable the RC-CC1352P-XXX module with TI development systems has been realized the following board adapter. Adapter board front Adapter board rear SMART RF06 Evaluation board (TI) Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

Recommended Reflow Profile for Lead Free Solder Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.