adio Sub 1GHz Multichannels Radio Transceiver It is a low cost sub 1GHz multichannels transceiver designed for low-consumption wireless applications. The hardware is based on Texas Instruments CC1101 component. Programmable from external microcontroller via SPI interface. XXX : Specified working frequency (433.92MHz. 868) For more information and details, please refer to the CC1101 Texas Instruments datasheet. Applications : Feature : - Wireless security systems - Bidirectional multichannel Link - Home and building automation - Low consumption technology - Automatic Measure Reading - Industrial Control and Monitoring - Wireless Sensor Network Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

Radio ontrolli Wireless Modules Mechanicals Dimension Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

ontrolli Wireless Modules Recommended Hardware design 1) Hardware All unused pins should be left floating; do not ground. All GND pins must be well grounded. Traces should not be routed underneath the module. 2) Power Supply The transceiver module must be powered from a regulated voltage. It is recommended to keep the power supply line for VCC as short and low impedence as possible. Near the power pins it is recommended to insert a ceramic the decoupling capacitor (100nF). 3) Ground Plane It is recommended to have a copper ground plane under the shielded zone of the module. The ground plane should...