2.4GHz WiFi Swivel Antenna with SMA Connector RC-ANT-2.4-SMA is an 2.4GHz WIFI Swivel Antenna with SMA Male connector. The dipole Antenna is primarilly designed for use with WIFI modules. It has quality robust TPE housing for use with wireless terminal. It can be used straight or hinged 90 degrees. The Antenna has a wide-band response and can also be used from 2400-2483MHz applications. Mechanical Dimensions: Technical Characteristics Characteristics What is VSWR? VSWR (Voltage Standing Wave Ratio) is a metric commonly used with antenna systems for ham or shortwave radio communication. VSWR is normally defined as a ratio with a 1:1 VSWR, indicating that there is an exact or perfect match between all antenna system elements.The higher the first number, the worse thematch, and the more inefficient the system. Since a perfect match cannotever be obtained, some benchmark for performance needs to be set. VSWR is a measure of the amount of signal that is reflected back from a connector. It is a vector quantity in that it has both amplitude and a phase component. This is important when considering the impact of multiple connectors in a transmission line. Mismatched impedances cause the reflections. If the cable being used has a characteristic impedance of 50 ohms, then the connector must also maintain 50 ohm impedance. The transition from the cable to connector transmission line sizes and captivation of insulators and contacts are the main causes of mismatches within the connector. Frequency Range Band Width Gain Radiation Polarization Maximum Input Power Antenna Radome Material ROHS Compliant Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.