Catalogs >
Radiocontrolli S.R.L. >
Bidirectional Remote Control System

Bidirectional Remote Control System
7Pages

Catalog excerpts

RCAT-868 D.Mi^r.tional Remote System - Home Automation - Access Control - Industrial Control - Alarm Systems sent (return receipt). ■ Possibility to check the status 868MHz wireless system for home automation, composed by a SEND unit (bidirectional remote control) and a RECEIVER unit with the possibility to switch up to N. 8 The RCAT-868 Bidirectional Remote System has been developed to meet the various needs of installers and Power Supply RX unit: 7-28Vdc electricians it can be used to switch on every kind of lighting, as well as other applications such as water games, electric PowerOutput+20dBm(100mW) gatesand automatic doors. combined with RX unit: The remote control (5 buttons) has the capacity both to transmit an receive (bidirectional) feature that makes it unique from other remote controls, allows the user to merely verifying, even remotely, the state of his system. Each time it is activated a command gets a visual confirmation if the activation operation was successful or not CIUIU IVIIUUMI 81050 San Tammaro(CE) Wireless Modules sales@radiocontrolli.com Pag. 1/7

Open the catalog to page 1

RCAT-868 Bidirectional Remote System XfiXMHi Wirakeis Adulter SYSTEM PART NUMBERING : - N. 1 RCAT-868 Receiver Unit (8 channels) -N.2 Bidirectional Remote Control (8 channels- 5 Keys) Power ON Transceiver Status Led led Antenna module flash when signals fixing holes Status Relay Relay switch terminal Supply Voltage COM= Common Technical Specifications RX Unit: -Encloser Rating : Not waterproofed - Current Max: 360mA(all relay actived) Technical Specifications TX Unit (remote control): - Battery Life: about 3 years Wireless Modules

Open the catalog to page 2

-868 p.^ntional Remote System SYSTEM PART NUMBERING : - N. 1 RCAT-868 Receiver Unit (4 channels) -N.2 Bidirectional Remote Control (4 channels- 4 Keys) Power ON Transceiver Status Led ■ d Antenna /module f|ash when signals fixing holes Status Relay Relay switch terminal COM= Common Technical Specifications RX Unit: -Encloser Rating : Not waterproofed -Current Max: 180mA(all relay actived) Technical Specifications TX Unit (remote control): - Battery Life: about 3 years -Supply Voltage: 12 Volt lWMUW,M WWW.radiOCOntrolM.com 81050 SanTammaro(CE) Wireless Modules sales@radiocontrolli.com Pag.3/7

Open the catalog to page 3

-868 p.^ntional Remote System Operation mode: Push a key for about 1 second, in this way you can verify the status of the corresponding relay GREEN=relay activated RED=relay not activated. Press the button for more than one second, the relay switches and you have a visual feedback Each time it is activated a command, returns a visual confirmation if the activation operation was successful or not (return of receipt). About the 8 channels system, the key denominated "SHIFT" it's used to activate the channels from 5 to 8 lWMUW,M WWW.radiOCOntrolM.com 81050 SanTammaro(CE) Wireless Modules...

Open the catalog to page 4

-868 p.^ntional Remote System Monostable/Bistable setting : This type of predisposition is carried out inside the remote control, see below :l Monostable / Bistable - 8 channels -No Jumper = all Output in BISTABLE MODE (DEFAULT CONDITION) -Jumper 1 -2 = Output 1,2,3,4 = BISTABLE Output 5,6,7,8 = MONOSTABLE -Jumper 2-3 = all Output in MONOSTABLE MODE Monostable / Bistable 4 channels -No Jumper = all Output in BISTABLE MODE (DEFAULT CONDITION) -Jumper 2-3 = all Output in MONOSTABLE MODE lWMUW,M WWW.radiOCOntrolM.com 81050 SanTammaro(CE) Wireless Modules sales@radiocontrolli.com Pag. 5/7

Open the catalog to page 5

-868 Bidirectional Remote System Installation Battery : The remote control of the kit are already equipped with batteries (ready to run ). If you need to change the batteries follow the instruction below: FRONT SIDE REAR SIDE correct polarity!!! correct polarity Wireless Modules

Open the catalog to page 6