VISION SYSTEMS iNSPECT.assembly™ Automated Visual Inspection Station Applications •- • Assembly verification: Presence, position, and routing of wires/ cables, fasteners, connectors, connector pins, screws, internal components (e.g., batteries, labels, jumpers, heat sinks, memory modules) • Ensure quality with greater precision and consistency than multiple human inspectors performing repeat inspections • Track defect trends, categorizing by defect type, test, or position on the product • Equivalent to human perception for low-contrast differentiation • Operate 24/7 with repeatability • In-line inspection with equivalent footprint to a human inspector on the line • Capture and measure large areas in a single image • Simultaneously inspect multiple diverse features on complex assemblies • Programmable software with sophisticated pass/fail criteria • Track pass/fail data and trends Turnkey solution for in-line inspection of complex electromechanical assemblies The INSPECT.assembly™ solution is a fully-integrated inspection station that utilizes a Radiant Vision Systems imaging photometer, bright field lighting, and programmable software to detect subtle, low-contrast component defects on complex assemblies. The system is easily added to the line to accommodate real-time inspection with greater accuracy and repeatability than human inspectors, while occupying the same footprint as an inspector on the line. INSPECT.assembly can track inspected parts by serial number while recording defects, defect type, and trends for each defect type by location. Human perception enables subtle defect detection and judgment of acceptable tolerances for the type, total, or scope of defects. However, after hours inspecting complex parts and minute variations, human inspectors fatigue physically and mentally, causing the accuracy of their inspections to degrade. Using a second inspector in serial to perform repeat inspection is a potential, but costly, solution. Alternatively, the INSPECT.assembly system leverages high-dynamic-range, scientific-grade imaging systems that are able to replicate human perception of contrast (identify multiple, subtle, low-contrast, diverse features simultaneously, with advanced logic to apply specific defect tolerances for pass/fail determinations), but with superior objectivity and repeatability to human inspectors. Radiant Vision Systems General Inquiries: [email protected] 18640 NE 67th Ct. Technical Support: [email protected] Redmond, WA 98052 USA Website: www.RadiantVisionSystems.com T: +1 425 844-0152 Copyright © 2021 Radiant Vision Systems LLC

Inspection Capability • Assembly verification: Presence, position, and routing of wires/ cables, fasteners, connectors, connector pins, screws, internal components (e.g., batteries, labels, jumpers, heat sinks, memory modules) • Product tracking, reporting, and manufacturing history for traceability and process control* Software Features • User-defined test parameters • User-editable pass/fail thresholds • Support for multiple inspection recipes • Real-time results displayed on screen • Local data storage • Output data to shop floor control system Specifications Parameter Specifications subject...