Industrial dyeing pumps
16Pages

INDUSTRIAL DYEING PUMPS ADVANCED FLUID MANAGEMENT SOLUTIONS Sturdy and reliable industrial and diaphragm pumps. ANNI DI 5YEARS GARANZIA WARRANTY Made Made In Italy In Italy

Packaging contains, depending on the articles, one or more of the following materials; they must be recycled in accordance with current regulations in the country of use. cardboard • polyethylene sack • polystyrene paper • wood • nails • plastic strap cellophane • clips • gummed paper

ADVANCED FLUID MANAGEMENT SOLUTIONS

the human side of Quality

INDUSTRIAL PISTON PUMPS TECHNICAL CHARACTERISTICS STRENGTH POINTS DIVORCED VERSION • The suction tube is designed and produced with a surface hardening treatment to prevent the corrosion. the pneumatic engine is 100% protected from any kind of suction tube’s leaks or breakages, ensuring a maximum efficiency and life-time. • Sturdy and solid with small dimensions and flow rate and hydraulic head high performances. • Usable in different positions: vertical, oblique and horizontal. Safety equipment as standard, composed by a transparent container where to check and refill the lubricant. •...

AIR-OPERATED INDUSTRIAL PUMPS AISI 304 STAINLESS STEEL 1” - 90 l/min Series ACCESSORIES (to be ordered separately) P/N 21/362 Basement with industrial pumps connector P/N 96EF450 Adjustable inlet filter connection in AISI 304 stainless steel with connection 2” (m)

INDUSTRIAL PISTON PUMPS TECHNICAL CHARACTERISTICS STRENGTH POINTS DIVORCED VERSION • Maximum resistance: pump is designed to resist also with very aggressive paints and fluids thanks to a special surface treatment. the pneumatic engine is 100% protected from any kind of suction tube’s leaks or breakages, ensuring a maximum efficiency and life-time. • Safety in time: pneumatic engine and suction tube are separated to avoid a possible contact between fluid and engine’s components. • High performance: industrial pumps are the result of many R&D years. They are tested one by one to ensure the...

AIR-OPERATED INDUSTRIAL PUMPS AISI 304 STAINLESS STEEL Series ACCESSORIES (to be ordered separately) P/N 21/362 Basement with industrial pumps connector Nipples G 2” (m) AISI 304 stainless steel Manual air bleeder P/N 10/06 Safety equipment 0 100 mm as standard, composed by a transparent container where to check and refill the lubricant. 9 ft P/N 95UF140 Adjustable outlet filter 1” (f) in AISI 304 stainless steel with connection 1.1/2” (f) P/N 96EF450 Adjustable inlet filter connection 2” (f) in AISI 304 stainless steel

^ STRENGTH POINTS • Maximum resistance: the pump is designed to resist very aggressive paints and fluids thanks to a special surface treatment. • Safety in time: pneumatic engine and suction tube are separated to avoid a possible contact between fluid and engine’s components. • High performance: industrial pumps are the result of many R&D years. They are tested one by one to ensure the best performance and efficiency. DIVORCED VERSION the pneumatic engine is 100% protected from any kind of suction tube’s leaks or breakages, ensuring a maximum efficiency and life-time. LUBRICATION...

AIR-OPERATED INDUSTRIAL PUMPS AISI 304 STAINLESS STEEL3/4” - 42 l/min Series ACCESSORIES (to be ordered separately) P/N 37817 Pressure regulator with discharge of condensation and air lubricator 1/2” (f) x 1/2” (f) P/N 10/05 Safety equipment 0 60 mm as standard, composed by a transparent container where to check and refill the lubricant. • ■ P/N 94UF140 Adjustable outlet filter 1” (f) in AISI 304 stainless steel with connection P/N 94EF450 Adjustable inlet filter connection 1.1/4” (f) in AISI 304 stainless steel

DIAPHRAGM PUMPS ADVANCED FLUID MANAGEMENT SOLUTIONS STRENGTH POINTS • Wide range: 3 diaphragm pumps families are available: entirely in aluminum, entirely in polypropylene and, last one, aluminum engine with polypropylene manifolds version. Each one of these families presents pumps with different size to ensure the maximum compatibility with every working environments. • Usable in explosive atmosphere: ATEX certification is available with the aluminum version and aluminum engine with polypropylene manifolds version. • Compatibility with all the fluids: there are a lot of membranes, seats...

TECHNICAL CHARACTERISTICS BALLS, SEATS AND MEMBRANES: are available in 5 different versions to satisfy every single working need. Surface treated for a maximum life-time. Single or double inlet/outlet versions available. 13

DIAPHRAGM PUMPS POLYPROPYLENE oo * With PTFE membrane flow rate is 10% lower ** *** The materials in contact with the fluid, and the Displacement per cycle may be influenced by suction lift, fluid viscosity, air pressure, number of cycles per minute fluid as well, can restrict the pump working temperature ACCESSORY (to be ordered separately) P/N 32/95 Flange in stainless steel AISI 304 with G 1” (f) thread suitable for the plant connection.

DIAPHRAGM PUMPS ALUMINUM co

RAASM industrial and diaphragm pumps, wall mounted or applicated directly in the system, allow the paints delivery inside the tissues dyeing machine. Company with an ISO 9001:2015 certified quality management system RAASM S.p.A. 36022 S. ZENO DI CASSOLA (VI) Via Marangoni, 33 - ITALY Export department Technical department