CLS – system 30
52Pages

SYSTEM LUBRICATION PROGRESSIVE CATALOG No. 803/30 ADVANCED FLUID MANAGEMENT SOLUTIONS

Packaging contains, depending on the articles, one or more of the following materials; they must be recycled in accordance with current regulations in the country of use. cardboard • polyethylene sack • polystyrene paper • wood • nails • plastic strap cellophane • clips • gummed paper

ADVANCED FLUID MANAGEMENT SOLUTIONS

the human side of Quality

AND DESIGN The real strength of a firm starts with the ability of its study and research departments to always find the most suitable solutions to address market demands. TESTING AND INSPECTIONS A sophisticated test room enables careful testing of the quality of new products before they are put on the market. ASSEMBLY LINES Dedicated equipment specially designed to facilitate assembly operations, at the same time allowing an effective and automatic control of quality.

STORAGE OF COMPONENTS Our vertical stores enable quick and careful preparation of the components and spare parts intended for assembly and sale. TECHNOLOGY INNOVATION QUALITY SAFETY RELIABILITY TECHNICAL ASSISTANCE RAASM has the most complete range of products for lubrication and the dispensing of fluids. The aim is to always respond fully to the questions of our customers and meet all their needs.

The progressive lubrication system consists of a pumping unit connected to divider valves which, through the pumping action of a piston placed inside them, ensure the delivery of a predetermined quantity of lubricant to a corresponding number of users. This system is defined such, since the action of each piston inside the divider valves, which allows the flow of lubricant to pass from one section to another of the divider valves, follows a progressive sequence of distribution to the various users. Each divider valves is placed in series with all the others, therefore malfunctioning of just...

ADVANCED FLUID MANAGEMENT SOLUTIONS

series C30B15 ELECTRIC MOTOR OPERATED PUMPS 12/24 V DC - 0 150 mm Sturdy and compact electric pumps with shockproof plastic cover for IP64 protection, ideal for stress work environments. Pumping pistons are radially placed in the aluminum basement below the lubricant reservoir. Available in 3 versions: - Remote control with all the programmable functions (pause and working time) managed by the control unit, depending on system requirements. - Analog control with alarm signal, reset functions, and outside cycle operations management. - Digital control with alarm signal, reset functions,...

-GUIDE TO CHOOSING PUMP 0 150 mm - 12 V DC

Sturdy and compact electric pumps with shockproof plastic cover for IP64 protection, with 3-5-8 liters tank capacity. Pumping pistons are radially placed in the aluminum basement below the lubricant reservoir. Available in 3 versions: - with remote control where the programmable functions (pause and working time) managed by the control unit, depending on system requirements - with analog control for alarm signal, reset functions and outside cycle operations management - with digital control for alarm signal, reset functions, pause and work times and outside cycle operations all managed by...

-GUIDE TO CHOOSING PUMP 0 180 mm - 12 V DC

Type of lubrication system with P/N 39290 Emergency stop button (optional) P/N 39289 Acoustic and flashing alarm (optional) Control equipment (page 42) Main line with piping in steel or in flexible rubber Electric motor operated pumps S. C30B15 - C30B18 Delivery control assembly (page 43) Line and outlet filter (page 40)

Monobloc and modular “Master” divider valves MDV-M and MDV-L (page 30-36) Cycle indicator (page 34) Secondary line with piping in steel tubing or flexible hose Lube point: In the plant are represented some types of moving parts that need to be lu

ADVANCED FLUID MANAGEMENT SOLUTIONS

Compact electric motor-operated pump, with dispense control group mounted on pump’s body. Pumping pistons are radially placed in the aluminum basement below the lubricant reservoir. The hardened galvanized steel pump works radially into the sturdy and compact nickel plated base. The epoxy powder painted lubricant tank is available in 3 different sizes: 10, 30 and 70 liters. Two electric motor (three-phase) are available with 4 or 6 poles, coupled with 35:1 or 70:1 ratio gear motor. These all specifics allow a wide combination of tanks, motors and gear motors to meet all end-users’ needs....

-GUIDE TO CHOOSING PUMP STANDARD EQUIPMENT Low level capacitive sensor. Visual level indicator for oil and grease. OVERALL DIMENSIONS (mm) 10 litres

Type of lubrication system with P/N 39290 Emergency stop button (optional) P/N 39289 Acoustic and flashing alarm (optional) Control equipment (page 41) Electric motor operated pumps S. C30S Main line with piping in steel or in flexible rubber Line and outlet filter (page 40)

Monobloc and modular “Master” divider valves MDV-M and MDV-L (page 30-36) Cycle indicator (page 34) Secondary line with piping in steel tubing or flexible hose Lube point: In the plant are represented some types of moving parts that need to be lubricat

ADVANCED FLUID MANAGEMENT SOLUTIONS

SERIES C30F AIR-OPERATED PUMP 10 Litres DRUM Depending on available feed type, on system’s specifics or on required dispense, an air-operated pump may be preferred to an electric one. Various solutions are available for great versatility: with 10 liters tank or suitable for 20, 50 or 200 Kg drums, provided with drum cover and grease follower plate (if necessary). If commercial drums are used, once the lubricant is finished the end user can replace the drum or fill it up again through the specific inlet, on request with a special kit. Oil pumps are provided with drum cover for open drums (up...

-GUIDE TO CHOOSING GREASE PUMP STANDARD EQUIPMENT Only for 10 litres model Only for 10 litres model Ultrasonic min/max level indicator (union M 3/4” G) Visual high level indicator for oil Visual high level indicator for grease