CLS – system 20
48Pages

DUAL LINE LUBRICATION SYSTEM N° 807-20 ADVANCED FLUID MANAGEMENT SOLUTIONS

ADVANCED FLUID MANAGEMENT SOLUTIONS the human side of Quality founded in 1975

SYSTEM LUBRICATION DUAL LINE Page 18 Series C20P motor-operated Page 24 Series C20F air-operated Page 12 Series C20S motor-operated Page 30 VDL-M Volumetric distributor Page 34 VED-L Modular volumetric distributor

Page 38 Electromotorized reversing valve Page 39 Reversing valve with pneumatic actuator Page 40 Overpressure reversing valves Page 41 - 42 Pressure switch and filter Page 43 - 44 Control equipment The dual line system is primarily used for great size industrial plants and machines where the number of greasing points goes easily above hundred. The most frequent applications are in: steel mills, wheel bucket reclaimers, large conveyor belts and cranes for shipyard. Our sales department is at your disposal to provide information and solutions.

ADVANCED FLUID MANAGEMENT SOLUTIONS

More than 5000 products available for your business

ADVANCED FLUID MANAGEMENT SOLUTIONS

SYSTEM 20 DUAL LINE

® Supplies an exact quantity of lubricant from the pumping unit to all the grease points located even at great distances. ® The dosing and measuring devices (called Volumetric distributors) are managed through two main lines, therefore the lubricant is always under the control of the system at the same time. ® The system can be easily extended through the addition of one or more Volumetric distributors. ® This high pressure system allows the use of particularly narrow pipes, enabling a reduction in quantity and deterioration of residual grease inside the piping, while also reducing...

SERIES C20S MOTOR-OPERATED with RADIAL PISTONS Compact motor-operated pump equipped with line inverter. It has a sturdy and compact base in nickel-plated aluminium alloy, radially fitted with pumping elements in galvanized hardened steel. The epoxy powder painted tank is available in 3 versions: 10, 30 and 70 litres. Two electric motors (three-phase) are available with 4 poles or 6 poles, to which gear motors with ratios of 35:1 and 70:1 are coupled. These all specifics allow a wide combination to meet all end-users’ needs.

STANDARD EQUIPMENT Visual level indicator for oil and grease Low level capacitive sensor High level capacitive sensor

ACCESSORIES PUMP SERIES C20S High or low level capacitive sensor Pressure gauge Overpressure reversing valve Pumping element Minimum and maximum capacitive level sensor Pressure gauge ø 63 mm 600 bar Overpressure reversing valve Pumping element ø 12 mm

P/N 39290 Emergency stop button (optional) P/N 39289 Acoustic and flashing alarm (optional) Control equipment (PLC) (Page 43-44) Overpressure reversing valve (page 40) Secondary line with piping in steel tubing or flexible hose Line and delivery filter (page 42)

Volumetric distributor Volumetric distributor Series VED-L (pag. 34) Series VDL-M (page 30) Lube point: In the plant are represented some types of moving parts that need to be lubricated.

SERIES C20P MOTOR-OPERATED PUMP PISTONS WITH OSCILLATING UNIT Pump equipped with large epoxy powder painted tank (40 or 100 litres) mounted on base in nickel-plated aluminium alloy. The pumping unit mounts dosing pistons available in two different diameters (7 or 10 mm). The pumping unit can be fitted with dosing pistons of two different diameters (7 or 10 mm), thereby offering a choice of different deliveries according to customer requirements. It is supplied with a minimum level sensor as standard: the latter allows to stop the operation of the pump in case of lack of lubricant inside the...

STANDARD EQUIPMENT Visual level indicator for oil and grease Low level capacitive sensor High level capacitive sensor OSCILLATING PUMPING UNIT The reciprocating motion of pumping group’s body allows the two dosing pistons dispense lubricant directly from pumping group to pump’s outlet.

ACCESSORIES PUMP SERIES C20P P/N 1581800 High or low level capacitive sensor

P/N 39290 Emergency stop button (optional) P/N 39289 Acoustic and flashing alarm (optional) Control equipment (PLC) (page 43-44) Secondary line with piping in steel tubing or flexible hose Electric-motorized line inverter (page 38) Overpressure reversing valve (page 40) Line inverter with pneumatic actuator (pag. 39) Line and delivery filter (page 42)

Type of lubrication system with motor-operated pump SERIES C20P Volumetric distributor Series VED-L (page 34) Volumetric distributor Series VDL-M (page 30) Line end pressure switch (page 41) Main line with piping in steel or in flexible rubber Lube point: In the plant are represented some types of moving parts that need to be lubricated.

SERIES C20F AIR-OPERATED PUMP DRUM Depending on available feed type, on system’s specifics or on required dispense, an air-operated pump may be preferred to an electric one. Various solutions are available for great versatility: with 10 liters tank or suitable for 20, 50 or 200 kg drums, provided with drum cover and grease follower plate (if necessary). If commercial drums are used, once the lubricant is finished the end user can replace the drum or fill it up again through the specific inlet, on request with a special kit. Oil pumps are provided with drum cover for open drums (up to 50 kg)...

ACCESSORIES PUMP SERIES C20F \ \ \ \ \ \ P/N 1582000 - 1582001 Air operated solenoid 24 V DC P/N 1582002 - 1582003 Air operated solenoid 110 V AC P/N 1582004 - 1582005 Air operated solenoid 230 V AC P/N 2080201 Overpressure reversing valve Min level indicator (optional only for oil)

P/N 39290 Emergency stop button (optional) P/N 39289 Acoustic and flashing alarm (optional) Control equipment (PLC) (page 43-44) Secondary line with piping in steel tubing or flexible hose Overpressure reversing valve (page 40) Air operated solenoid valve 24 V DC - 110 V AC 230 V AC (page 26) Line and delivery filter (page 42)

Type of lubrication system with air-operated pump SERIES C20F Volumetric distributor Series VED-L (page 34) Volumetric distributor Series VDL-M (page 30) End line pressure switch (page 41) Main line with piping in steel or in flexible rubber Lube point: In the plant are represented some types of moving parts that need to be lubricated.