CLS – system 15
44Pages

■ \ , V, . ■ ■ Vf t ( L .. J. ! I l'l ..t-l-n'l ' .V ■ , < . '

Packaging contains, depending on the articles, one or more of the following materials; they must be recycled in accordance with current regulations in the country of use. cardboard • polyethylene sack • polystyrene paper • wood • nails • plastic strap cellophane • clips • gummed paper

ADVANCED FLUID MANAGEMENT SOLUTIONS

the human side of Quality

AND DESIGN The real strength of a firm starts with the ability of its study and research departments to always find the most suitable solutions to address market demands. TESTING AND INSPECTIONS A sophisticated test room enables careful testing of the quality of new products before they are put on the market. ASSEMBLY LINES Dedicated equipment specially designed to facilitate assembly operations, at the same time allowing an effective and automatic control of quality.

STORAGE OF COMPONENTS Our vertical stores enable quick and careful preparation of the components and spare parts intended for assembly and sale. TECHNOLOGY INNOVATION QUALITY SAFETY RELIABILITY TECHNICAL ASSISTANCE RAASM has the most complete range of products for lubrication and the dispensing of fluids. The aim is to always respond fully to the questions of our customers and meet all their needs.

SYSTEM 15 SINGLE LINE SERIES

The single-line decompression lubrication system consists of an independent pump assembly which delivers the lubricant (oil or grease) to direct response volumetric distributors (injectors) through a main line. System operation occurs through two phases: 1 - Injector filling (the system is not under pressure) 2 - Dispensing of the lubricant (the system is under pressure) Each injector can be adjusted to deliver different amounts of lubricant. The pump assembly is equipped with a device (discharge valve) which enables rapid decompression of the system immediately after the action of the...

ADVANCED FLUID MANAGEMENT SOLUTIONS

SERIES C15S MOTOR-OPERATED PUMP 230/400 V AC - 275/480 V AC Compact electric motor-operated pump, equipped with an electromagnetic solenoid discharge valve that unloads the grease directly into the tank at cycle end. It has a sturdy and compact base in nickel-plated aluminium alloy fitted with pumping elements in galvanized hardened steel. The epoxy powder painted lubricant tank is available in 3 different sizes: 10, 30 or 70 litres.Two electric motors (three-phase) are available with 4 poles or 6 poles, to which gearmotors with ratios of 35:1 and 70:1 are coupled. These all specifics allow...

-GUIDE TO CHOOSING PUMP

Type of lubrication system with P/N 39289 Acoustic and flashing alarm (optional) P/N 39290 Emergency stop button (optional) Control equipment (page 33) Visual high level indicator Main line with piping in steel or in flexible rubber Solenoid discharging valve (page 31) Line filter (page 32)

MOTOR-OPERATED PUMPS SERIES C15S Volumetric injectors SLHP-D (page 28-29) Line end pressure switch (page 32) Connected to PLC Secondary line with piping in steel tubing or flexible hose Lube point: In the plant are represented some types of moving parts that need to be lubricated

ADVANCED FLUID MANAGEMENT SOLUTIONS

SERIES C15B18 MOTOR-OPERATED PUMP 24 V DC - 0 180 mm It can be used in heavy conditions thanks to IP55 protection rating, and is equipped with radially fitted pumping elements controlled by an eccentric wheel driven by a gearmotor. The lubricant is contained in a transparent tank of 8 - 10 litres capacity. A rotating blade, in conjunction with the eccentric wheel or a follower plate, facilitate suction of the lubricant even with high viscosity greases (NLGI 2). The support on the central body in aluminium enables wall mounting of the unit. Located on the central body is a grease filter (150...

GUIDE TO CHOOSING PUMP P/N Grease 1524565 1527805 1560645 1524835 1528075 1560825 Reservoir capacity (litres) PUMPING UNIT STANDARD EQUIPMENT Dosing piston Magnetic low level indicator for grease. Capacitive low level indicator for oil. Delivery connection Single-acting valve litres Packing-m 8 litres Grease Packing-m Grease Packing-m

Type of lubrication system with P/N 39290 Emergency stop button (optional) P/N 39289 Acoustic and flashing alarm (optional) Control equipment (page 34) Main line with piping in steel or in flexible rubber Motor-operated pump S. C15B18 Solenoid discharging valve (page 31) Line filter (page 32)

MOTOR-OPERATED PUMP SERIES C15B18 Volumetric injectors SLHP-D (page 28-29) Line end pressure switch (page 32) Connected to PLC Secondary line with piping in steel tubing or flexible hose Lube point: In the plant are represented some types of moving parts that need to be lubricated

ADVANCED FLUID MANAGEMENT SOLUTIONS

SERIES C15F AIR-OPERATED PUMP 10 litres DRUM Depending on available feed type, on system’s specifics or on required dispense, an airoperated pump may be preferred to an electric one. Various solutions are available for great versatility: with 10 liters tank or suitable for 20, 50 or 200 Kg drums, provided with drum cover and grease follower plate (if necessary). If commercial drums are used, once the lubricant is finished the end user can replace the drum or fill it up again through the specific inlet, on request with a special kit. Oil pumps are provided with drum cover for open drums...

-GUIDE TO CHOOSING PUMP STANDARD EQUIPMENT Only for 10 litres model Only for 10 litres model Ultrasonic min/max level indicator (union M 3/4” G) Visual high level indicator for oil Visual high level indicator for grease OVERALL DIMENSIONS (mm) P/N Grease

Type of lubrication system with P/N 39290 Emergency stop button (optional) P/N 39289 Acoustic and flashing alarm (optional) Control equipment (page 33) Air operated solenoid valve 24 V DC - 110 V AC 230 V AC (page 37) Main line with piping in steel or in flexible rubber Pneumatic discharge valve (page 30) Line filter (page 32)

AIR-OPERATED PUMP SERIES C15F Volumetric injectors SLHP-D (page 28-29) Line end pressure switch (page 32) Connected to PLC Secondary line with piping in steel tubing or flexible hose Lube point: In this plant are represented some types of moving parts that need to be lubricated