> Robust, industrial Access Point for Zone 1 > Based on ProSoft RLX2-IHW-E > Degree of protection IP66 > For use from -40 to +60°C > Standard: IEEE 802.11a/b/g Solution for 802.11n on request > Solutions for Cisco, Juniper etc. are available The WLAN Access Point enables wireless data transmission in hazardous areas. For instance, it is possible to access data in a company network from a PDA or a notebook with WLAN interface, transmitting data or controlling sequences. The WLAN Access Point from R. STAHL stands out due to its easy installation and a robust enclosure which is suitable for rough industrial environments. Its wide temperature range allows it to be used almost under all conditions. The device supports the widely used standards IEEE 802.11a/b/g. 802.11n with up to 300 Mbit/s on request. ATEX/IECEx Zone 0 1 2 20 21 22 Installation in x x x x

,/ • WLAN access point cally safe Ex ia ZONE1 acc. to spec industrial design W 17583E00 WLAN Access Point Series 8265

WLAN Access Point Series 8265 - ^ wire™ ^less Technical Data

wire™ ^less WLAN Access Point Series 8265 Customer-specific version of the WLAN access point If none of the given basic versions suits your needs, we will be glad to develop a customer-specific configuration. Please fill in the form and enclose it with your request.

WLAN Access Point Series 8265 A6 Dimensional Drawings (All Dimensions in mm [inches]) - Subject to Alterations Ø 11 [Ø 0,43] 8265, size 4, external antenna Project-specific solutions e.g. for CISCO AIR-LAP 1262 N-E, Installation in Zone 1 Dimensions: 520 x 410 x 281 mm Full 802.11n functionality Allows unrestricted antenna selection Status LED visible outside Easily accessible connection chamber Optional: Use of FO media converter Ex op is Optional: FO Splicebox Ex op pr We reserve the right to make alterations to the technical data, dimensions, weights, designs and products available without...