QUIRI HYDROSystems SPS600 Digital Servo controller
8Pages

The SPS600 control system is based on a full 16 bits digital electronic rack linked to a PC through fast ETERNET LAN. The entire hardware concept is based on a non-wiring technology which allows full compatibility to the CEM European rules. Each system controls up to 6 axis extensible to 12 if required. The software running under Windows® is designed to perform all kind of standards or customized testing applications, environment. The hardware is based on a 19’’-3U electronic rack. CPU cards are mounted in the front, the other cards like sensor conditioning cards and DIG in out cards are...

Multi-axis and multi-tests system SPS 600 is a real 16 bits multi –axis and multi test system. Each SPS 600 allows you to pilot 6 actuators running on different tests. Create your test by dedicating the required number of axis (the axis can be a stand alone machine), setup easily the sensors linked to the test, save and run! SPS remote control allows to adjust and setup by being close from the actuators.

Analog inputs : Dynamic peak correction: 3 types of sensors inputs : For the high, low or variable stiffness’ samples. Displacement sensors type LVDT, RVDT or half bridge inductive. Load cells Digital in-outs: Analog ± 10V (24Vcc and ± 15V available on each connector). Creation screens: Calculated channels Typical application: Calculation of the force with pressure inputs. PID setup: 8 PID par axis (Displacementt, Force,... ) with dither. Special compensation functions Double gain and non linear gain Supervision screens are used to monitor and view a test or an installation (e.g. managing a...

Test control Pilot function Sélecton the axis and type of controlt (mode FORCE, DISPLACEMENT,…). Periodic function generator : Sélection of 'amplitude ± A ( mm, daN,…) ,Selection of the frequency f (Hz), cycles : fixed or unlimited, type of signal (sine, triangle, square,special shape signal…) Ramp generator : EMP function (Multi Profil test) : Supervision screens are used to monitor and view a test or an installation (e.g. managing a hydraulic unit). Text, images, touch or hold buttons, oval or rectangular indicators and digital displays of the value of acquisition channels may be placed...

Data acquisition and analyze Acquisition channel setup: Data analyse The channels are described by a mathematical formula with the following predefined variables: This post-acquisition display window is used to view and process the curves saved in the raw acquisition file (extension acq).

CP-100 CPU control board multi PID Multi profile signal generation Security checking Test management 8 TTL inputs 8 TTL outputs 8 analog inputs ±10V, 16 bits (ADC converter), 4 analog outputs ±10V, 16 bits. (DAC converter) 2 fast TTL inputs (incremental coder) 1 RS232 serial port 1 RS485 serial port CCS-100 Sensor conditionner 1 DC sensor input ( load cell) 1 LVDT or RVDT input channel 1 Servo valve output 1 conditioner channel for Linear transducer sensor 1 conditioner channel for DC sensors ( load cells ) 1 analog output ( +/- 10 V or +/- 20 mA ) for servo-valve 2 opto-isolated inputs (...