*mydirectindustry

QSI 335i-500i

Product catalog summary

Overview: This document serves as a comprehensive parts manual for Quincy Compressor models QSI-335i/370i and QSI-440i/500i. It includes essential safety information, specifications, and procedures for ordering replacement parts and performing maintenance. It is crucial for personnel involved in operating or maintaining this equipment to thoroughly read this manual.

Main Sections:

1. Serial Number Identification: The serial number is crucial for ordering replacement parts and is located on the unit frame and electrical control panel.

2. Ordering Replacement Parts: To ensure prompt service, provide the serial number, exact part number, quantity needed, and preferred transportation type. Orders should be placed through authorized distributors to maintain warranty validity.

3. Fluid Specifications: Quincy recommends using QuinSyn® Brand synthetic fluids. For conversions to other synthetic fluids, contact an authorized distributor. Fluid analysis kits are available for early issue detection.

4. Safety Warnings: Ensure all guards are in place before starting the machine. Air from the equipment should not be used for breathing or food processing unless it meets OSHA or FDA standards.

5. Recommended Spare Parts: A list of spare parts, including temperature switches, valves, and fluid containers, is provided for maintenance purposes.

6. Discharge Piping and Motor Mounting: Detailed parts lists and diagrams for discharge piping and motor mounting configurations for different models are included.

7. Drive Coupling: Information on drive coupling components and maintenance parts, including torque values, is provided.

8. Electrical Control & Starting: Parts lists and descriptions for standard PLC control and electronic/powersync control systems are detailed, including emergency stop buttons, transformers, and phase monitors.

Specifications: Detailed specifications for electrical components such as relays, contactors, starters, and fittings used in control piping systems are provided.

Procedures: Installation and configuration of electrical components should follow specified part numbers and configurations for the intended voltage and horsepower. Optional components like the phase monitor should be considered based on specific application needs.

Standards and Recommendations: Ensure compatibility of components with specified voltage and horsepower ratings. Follow manufacturer guidelines for installation and maintenance to ensure optimal performance and safety.

Key Data from Tables: Part numbers and quantities for each component are provided for different voltage and horsepower configurations.

Critical Information: Ensure correct part numbers are used for specific voltage and horsepower requirements. Components not required for solid state and remote starts are clearly marked.

Control Schematics: Several control schematics are provided for different configurations of the QSI 370i/500i compressors, detailing electrical connections and components.

Electrical Control Diagrams: Includes diagrams for various starting methods, highlighting necessary electrical components and connections.

Decals and Tags: Lists safety decals, caution tags, and component identification decals for different models.

Key Notes: Emphasizes the importance of torque values for screws and the need for proper electrical protection according to national and local codes.

Standard Terms and Conditions: Outlines terms for Quincy Compressor and Ortman Fluid Power Divisions, including title and lien rights, patent infringement defense, standard warranty, liability limitations, and compliance with environmental and OSHA standards.

Order Cancellation and Payment Terms: Details rights to cancel unshipped items, payment terms, and responsibilities for storage charges and collection costs.

Taxes: Prices exclude taxes related to manufacture, sales, or delivery, which the buyer must pay unless an exemption certificate is provided.

Acceptance: All purchase offers, quotations, and sales contracts require final acceptance by an authorized representative at the seller's plant.

Delivery: Delivery is FOB point of shipment unless specified otherwise. The seller is not liable for delays due to uncontrollable events, and claims for shortages must be made in writing within 10 days of receipt.

Catalog excerpts

QSI-335i/370i QSI-440i/500i Direct Drive Air Compressor Parts Manual This manual contains important safety information and should be made available to all personnel who operate and/or maintain this product. Carefully read this manual before attempting to operate or perform maintenance on this equipment. Manual No. 2012203789 August 2015 Edition

Open the catalog to page 1

Alphabetical Index

Open the catalog to page 3

Serial Number Identification The serial number tag is located on the top flange of the unit frame just left of the control panel and in the upper right corner of the electrical control panel. QUINCY COMPRESSOR 701 North Dobson Avenue, Bay Minette, AL Ordering Replacement Parts Prompt service can be rendered on replacement part orders if the following information 1. The serial number must be given when ordering replacement parts. Part numbers should be verified per the bill of materials associated with the serial number to ensure that correct replacement parts are ordered. 2. State the exact part...

Open the catalog to page 5

Fluid Specifications Quincy Compressor® recommends that all Quincy Rotary Screw Products be filled with one of the following QuinSyn® Brand synthetic fluids: QuinSyn Plus™ QuinSyn F® (food grade) Synthetic fluids other than QuinSyn brand(s) may not be compatible with components used in Quincy Compressor products. If it is deemed necessary to convert a Quincy compressor or vacuum pump to a synthetic other than QuinSyn brand, please contact an authorized Quincy Compressor distributor. To locate your nearest distributor, contact Sales & Marketing in Bay Minette, Alabama: Phone 251.937.5900 or visit...

Open the catalog to page 6

Recommended Spare Parts PART NUMBER 1627 4562 61 DIFFERENTIAL PILOT VALVE KIT (INCLUDES DIAPHRAGM ASSEMBLY & SEAT) 2013 4002 82 FLUID FILTER ELEMENT 1627 4560 46 THERMAL VALVE KIT (INCLUDES ELEMENT, SEAL & O-RING) 3 16274561 69 QUINSYN PG FLUID (5 GALLON CONTAINER) 3 1627 4561 72 QUINSYN PLUS FLUID (5 GALLON CONTAINER 3 1627 4560 02 QUINSYN F FLUID (5 GALLON CONTAINER) 3 2013 1003 06 QUINSYN XP FLUID (5 GALLON CONTAINER) GUARDS MUST BE FASTENED IN PLACE BEFORE STARTING THE MACHINE AND NEVER REMOVED BEFORE DISCONNECTING AND LOCKING OUT THE MAIN POWER SUPPLY. AIR IN THE PIPING FROM THIS EQUIPMENT...

Open the catalog to page 7

(ONLY APPLICABLE FOR GAUGE UNITS, OTHERWISE PLUGGED) Part Number

Open the catalog to page 8

(ONLY APPLICABLE FOR GAUGE UNITS, OTHERWISE PLUGGED) Part Number

Open the catalog to page 9

ITEM NO. QTY. PART NUMBER

Open the catalog to page 10

ITEM NO. QTY. PART NUMBER

Open the catalog to page 11

Motor Mounting, TEFC (QSI-5OO0 - 2011 014633 ITEM NO. QTY. PART NUMBER

Open the catalog to page 12

ITEM NO. QTY. PART NUMBER DESCRIPTION COMPONENT MAINTENANCE PARTS @ INDICATES TORQUE VALUE IN FOOT POUNDS (LUBRICATED THREADS).

Open the catalog to page 13

ITEM NO. QTY. PART NUMBER DESCRIPTION COMPONENT MAINTENANCE PARTS @ INDICATES TORQUE VALUE IN FOOT POUNDS (LUBRICATED THREADS).

Open the catalog to page 14

ITEM NO. QTY. PART NUMBER DESCRIPTION COMPONENT MAINTENANCE PARTS @ INDICATES TORQUE VALUE IN FOOT POUNDS (LUBRICATED THREADS).

Open the catalog to page 15

Drive Coupling, TEFC (QSI-500i) - 2011005110

Open the catalog to page 16

Drive Coupling, TEFC (QSI-5OO0 - 2011005110 ITEM NO. QTY. PART NUMBER DESCRIPTION COMPONENT MAINTENANCE PARTS @ INDICATES TORQUE VALUE IN FOOT POUNDS (LUBRICATED THREADS).

Open the catalog to page 17

Electrical Control & Starting (standard PLC control) NOTES-UNLESS OTHERWISE SPECIFIED: I) ITEMS 3, 12 I 26 (DECAL SHEET, TEMPERATURE SWITCH & CURRENT TRANSFORMER) 2) ITEM 15 (RELAY) USED ONLY ON UNITS WITH REDUCED VOLTAGE OR REMOTE STARTER 3) TWO DRIVE MOTOR CONTACTORS (ITEM 24) i SECOND POWER BLOCK (ITEM 14) USED ONLY ON UNITS WITH WYE-DELTA STARTING. -5) DRIVE MOTO.^ OVERLOAD I ITEM 25! IN THIS LOCATION ON WYE-DELTA START UNITS.

Open the catalog to page 18

Electrical Control & Starting (standard PLC control) ITEM NO. PART NUMBER DECAL,PANEL,CONTROL,QSI(I) AY,BLOCK,TERM,QSI,ELE DECAL SHEET,ELECTRICAL CHIP,PLC,PROGRMMED,STDCTRL,QSI PLC,CNTRLR,24RCO,24VAC BUTTON,ESTOP,1/4 TURN ,SIEMENS CONTACT,1 NC,SIEMENS (NORMALLY CLOSED) BUTTON,MOMENTARY,GREEN,ILL LAMP,S-ST,GREEN,120VAC LENS,INDICATOR,RED LAMP,S-ST, RED,120VAC SWITCH,SELECTOR,2-POSITION,MNT CONTACT,1 NO,SIEMENS (NORMALLY OPEN) CONTACT,1 NC,SIEMENS (NORMALLY CLOSED) PLATE,LEGEND,AUX MTR OVERLOAD PLATE,LEGEND,COMP 1 FAULT PLATE,LEGEND,LEAD/LAG TERMINAL,GRND,14AWG-2AWG SWITCH,TMP,230F 230-242,0,SPST...

Open the catalog to page 19

Electrical Control & Starting (electronic and powersync control) 2014002410

Open the catalog to page 20

PART NUMBER 1900520025 2014000891 2014000803 2014000805 2230050005 2230050005 2014706268 1900520037 2013700877 2014703800 2014703682 (SEE PAGE 22) (SEE PAGE 22) 1089941547 (SEE PAGE 22) (SEE PAGE 22) (SEE PAGE 22) (SEE PAGE 22) (SEE PAGE 22) (SEE PAGE 22) (SEE PAGE 22) (SEE PAGE 22) (SEE PAGE 22) (SEE PAGE 22) (SEE PAGE 22) (SEE PAGE 22) (SEE PAGE 22) (SEE PAGE 22) (SEE PAGE 22) (SEE PAGE 22) (SEE PAGE 22) 2014704058 2014704069 2013700964 2014704246 1089057470 1089057554 1622509905 Q-CONTROL EMERGENCY STOP BUTTON FUSE BLOCK-1 POLE FUSE BLOCK-3 POLE ICONS POWER SUPPLY FOR ICONS TRANSFORMER-500VA,MULTIPRIMARY,...

Open the catalog to page 21

Electrical Control & Starting (electronic and powersync control) ITEMII OVERLOAD DISCONNECT VOLTAGE QTY. PART NUMBER ITEM 13 SOLID STATE STARTER/ REMOTE START OVERLOAD RELAY DRIVE MOTOR CONTACTOR

Open the catalog to page 22

Electrical Control & Starting (electronic and powersync control) ITEMI 8 (STANDARD PLC) TRANSFORMER FUSES(PRIMARY) VOLTAGE QTY. PART NUMBER ITEM28 (STANDARD PLC) FAN MOTOR OVERLOAD RELAY ITEM27 (STANDARD PLC) FAN MOTOR CONTACTOR

Open the catalog to page 23

Control Piping (standard PLC control) - 2011 01 5651 CHECK VALVE Quincy Compresso

Open the catalog to page 24

Control Piping (standard PLC control) - 2011 01 5651 ITEM NO. QTY. PART NUMBER BRACKET,SUPPORT,CONTROL PIPE COMPONENT MAINTENANCE PARTS (INCLUDES DIAPHRAGM ASSEMBLY & SEAT)

Open the catalog to page 25

Control Piping (standard PLC control) - 2011 01 5654 CHECK VALVE Quincy Compress

Open the catalog to page 26

Control Piping (standard PLC control) - 2011 01 5654 ITEM NO. QTY. PART NUMBER BRACKET,SUPPORT,CONTROL PIPE COMPONENT MAINTENANCE PARTS (INCLUDES DIAPHRAGM ASSEMBLY & SEAT)

Open the catalog to page 27

Control Piping (standard PLC control) - 2011 01 5655 CHECK VALVE

Open the catalog to page 28

Control Piping (standard PLC control) - 2011 01 5655 ITEM NO. QTY. PART NUMBER BRACKET,SUPPORT,CONTROL PIPE COMPONENT MAINTENANCE PARTS (INCLUDES DIAPHRAGM ASSEMBLY & SEAT)

Open the catalog to page 29

QSI 335i-500i

QSI 335i-500i

Catalog excerpts

All Quincy Compressor catalogs and technical brochures