WR100LNA -Compact and secure dual-SlM LTE CPE WIth RS485 or RS232 for varlous industrlal usescenarlos
WR100LNA -Compact and secure dual-SlM LTE CPE WIth RS485 or RS232 for varlous industrlal usescenarlos
The WR100LNA is a compact and secure dual-SIM LTE CPE designed for various industrial scenarios. It measures 90mm x 90mm x 24mm and weighs 200g. It operates on a voltage range of 8 to 32V DC and can function in temperatures from -30℃ to +70℃, with storage temperatures ranging from -40℃ to +80℃.
The device includes 1 WAN/LAN and 1 LAN Ethernet port, a serial port (RS485 or RS232), 2 SIM slots, 2 mobile antennas, 1 WiFi antenna, and 4-pin power sockets. It features LED indicators for power, mobile status, signal strength, and WiFi, along with a reset button.
Security features include a firewall with IP/MAC and domain filters, NAT, DDOS attack prevention, DMZ, port scan, and WiFi security with WPA-PSK, WPA2-PSK, and AES. Access control is managed through data connection port scans and MAC address filters.
The device runs on a Linux-based OpenWrt OS with 128MB DDR2 RAM and 16MB SPI Flash storage. It supports OpenVPN, IPsec, GRE, PPTP, and L2TP clients and servers. Network features include NAT, static/dynamic routing, and firewall capabilities. Connection monitoring is available through ping and scheduled reboots, with remote management via WEB UI, SSH, SMS, and RMS FOTA.
The WR100LNA supports LTE Cat 4 and WCDMA, with LTE FDD bands B2/B4/B5/B12/B13/B14/B66/B71 and WCDMA bands B2/B4/B5. Data transmission rates for LTE are up to 150Mbps (DL) and 50Mbps (UL), while UMTS supports DC-HSDPA up to 42Mbps (DL) and HSUPA up to 5.76Mbps (UL). WiFi operates on IEEE 802.11 b/g/n at 2.4 GHz, with data rates up to 144Mbps for 20MHz and 300Mbps for 40MHz. Ethernet includes 1 FE (WAN/LAN) configurable port and 1 FE (LAN).
Supported protocols include TCP, UDP, PPP, NTP, NITZ, FTP, FTPS, HTTP, HTTPS, PING, CMUX, FILE, MQTT, MMS, SMTP, and SSL.
Catalog excerpts
Compact and secure dual-SIM LTE CPE with RS485 or RS232 for various industrial use scenarios Connectivity General Specifications Operating Band Data Transmission LTE: LTE FDD: max 150Mbps (DL)/max 50Mbps (UL) UMTS: DC-HSDPA: max 42Mbps (DL) HSUPA: max 5.76Mbps (UL) WCDMA: max 384Kbps (DL)/max 384Kbps (UL) IEEE 802.11 b/g/n, 2.4 GHz 1 x FE (WAN/LAN), can be configured as WAN or LAN port through software. 1 x FE (LAN) Network Protocol TCP/ UDP/ PPP/ NTP/ NITZ/ FTP/ FTPS / HTTP/ HTTPS/ PING/ CMUX /FILE/ MQTT/ MMS/ SMTP/ SSL Operating Voltage Operating Temperature Clients and server support Clients and server support Security Firewall IP/MAC Filter, Domain Filter, NAT Attack Prevention DDOS, DMZ, port scan WiFi Security Access Control Data connection port scan. Mac address filter. Ethernet Ports Serial Port 1 serial port (RS485 or RS232 on demand) Operating System Linux based OpenWrt OS Mobile Antennas Alternative Link Mobile, Wire, Wi-Fi. Primary and backup link configured as requirement, auto load balance. WiFi Antenna Network Features NAT, Static/Dynamic routing(Rip Protocol), Firewall Power Sockets 4 pin Power, Mobile Status, Mobile Signal Strength, WiFi Ping Reboot, Scheduled Reboot Connection Monitoring Reset Button Remote Management FLASH storage Driving Smarte
Open the catalog to page 1All Queclink catalogs and technical brochures
Archived catalogs
GL520MG3 Pages