Compact Size LTE Cat.4/3G/2G BLE 5.2 I/O Interfaces Scheduled Report Geo-fences Speed Alarm Tow Alarm SOS Alarm Driving Behavior Monitoring Ignition Detection Crash Detection & Accident Reconstruction LTE Cat 4 Mini GNSS Tracker Jamming detection OTA Control Power on Report 86.7(L) × 46.4(W) × 18.1(H) mm Operating Voltage: 8V to 32V DC Li-Polymer, 190 mAh Motion Detection The GV58LAU is the most cost-effective LTE Cat 4 telematics device ideal for variety of fleet management applications ranging from general fleet tracking, car rental and leasing to stolen vehicle recovery, logistics and more. The product supports various BLE accessories including temperature and humidity, driver identification sensors either from Queclink or our selected partners. Stolen Vehicle Recovery Fleet Management

Latin Amercia Network/Operating Band LTE FDD: B1/B2/B3/B4/B5/B7/ B8/B28 LTE TDD: B40 WCDMA: B1/B2/B5/B8 GSM: 850/900/1800/1900 MHz GNSS Type u-blox All-in-one GNSS Receiver Digital Input Digital Output Latched Digital Output Cellular Antenna 1 positive trigger input for ignition detection 1 negative trigger input or 1 digital output, open collector/drain, maximum output current 150 mA 1 digital output, open drain, 150 mA max drive current 1 digital output with internal latch circuit, open drain, 150 mA max drive current Internal Primary, Rx-diversity Antenna GNSS Antenna Internal only Internal...

USB to Micro USB Data Cable It is used for configuration, firmware upgrading and debugging Model: Data_Cable_M_V4 WTH301 BLE temperature and humidity sensor WKF300 BLE key fob for continuously detecting the on-board status of the device CAN100 BLE The CAN100 BLE decodes information from vehicles digital buses (CANBus and J1708) for vehicle monitoring. The CAN100 provides information that indicates the vehicles current state, including vehicle odometer, fuel level, engine speed, engine temperature and state of doors via BLE. Model: CAN100 BLE