GV50CNA-LTE CAT1 compact GNss tracker for BHPH application
GV50CNA-LTE CAT1 compact GNss tracker for BHPH application
The device is a compact LTE CAT1 GNSS tracker designed for BHPH applications. It features internal antennas for cellular, Wi-Fi, and GNSS, and supports BLE 5.1 optionally. The device dimensions are 94(L) x 29(W) x 17(H) mm, weighing 47 g. It operates on a voltage range of 8V to 32V DC and within a temperature range of -20℃ to +60℃. It includes a Li-Polymer backup battery with a capacity of 190 mAh.
The device includes a micro USB interface for configuration, upgrade, and debugging. It supports a nano SIM card and is compatible with an eSIM chip.
Operating on LTE FDD bands B2/B4/B5/B12/B13/B66/B71, it supports data transmission rates of up to 10Mbps for download and 5Mbps for upload.
The device supports indoor location tracking via Wi-Fi access point scanning.
It features an all-in-one GNSS receiver supporting GPS, Glonass, Galileo, and Beidou constellations. Sensitivity levels are -147dBm for cold start, -151dBm for hot start, and -160dBm for tracking. Position accuracy is less than 2.0m, with a cold start TTFF of 28 seconds and a hot start TTFF of 1 second.
The device supports TCP, UDP, and SMS protocols for data transmission.
It can report position and status based on preset intervals, distance, mileage, or a combination of these settings. It supports up to 20 internal geo-fence regions and includes alarms for speed, low power, power on, tow events, and aggressive driving behavior. It also features crash detection for accident data collection and analysis.
The device supports OTA control of digital outputs and virtual ignition detection based on voltage and accelerometer. It includes one positive trigger input for ignition detection, one configurable port for negative digital input or output, and one latched digital output.
Catalog excerpts
GV50CNA LTE CAT1 compact GNSS tracker for BHPH application General Specifications Operating Band Data Transmission Backup Battery Operating Voltage Operating Temperature Storage Temperature Buffer Messages GNSS Specifications GNSS type All-in-One GNSS receiver Constellation Support GPS, Glonass, Galileo, Beidou Cold start: -147dBm Hot start: -151dBm Tracking: -160 dBm Position Accuracy Autonomous: <2.0m (CEP) TTFF (Open Sky) Cold start: 28 seconds average Hot start: 1 second average Wi-Fi Specifications Wi-Fi Indoor location tracking via Wi-Fi access point scanning Air Interface Protocol Transmission Protocol Scheduled Report Report position and status based on preset time intervals, distance, mileage, or a combination of these settings Geo-fence alarm and parking alarm, support up to 20 internal geo-fence regions Speed Alarm Flexible speed monitoring for unusual speed alarm Low Power Alarm Alarm when backup battery is low Power On Report Report when the device is powered on Alarm for tow event in ignition-off state Driving Behavior Monitoring Aggressive driving behavior detection, including harsh braking, acceleration, etc. Crash Detection Accident data collection for reconstruction and analysis Remote Control OTA control of digital outputs Virtual Ignition Detection Based on voltage and accelerometer Digital Input 1 x positive trigger input for ignition detection Configurable Input/Output 1 x configurable port for negative digital input or output (open drain, with 150 mA max drive current) Latched Digital Output 1 x digital output with one internal latch circuit, open drain, 150 mA max drive current Cellular Wi-Fi Antenna Internal only GNSS Antenna Internal only Nano (4FF) + eSIM chip compatible Used for configuration, upgrade
Open the catalog to page 1All Queclink catalogs and technical brochures
Archived catalogs
GL520MG3 Pages