GV501LG specifications LTE Cat 4 easy install OBD router with WiFi AP mode, specially designed for insurance, car leasing and real-time monitoring applications LTE Specifications Operating Band WCDMA Specifications Operating Band GNSS Specifications GNSS Type u-blox All-in-One GNSS receiver Autonomous: -147 dBm Hot Start: -156 dBm Reacquisition: -160 dBm Tracking: -162 dBm Position Accuracy Autonomous: < 2.5m (CEP) WiFi Specifications WLAN Standard Typical Transmit Power Typical Receiver Sensitivity WiFi Antenna Internal only Cold start: 27s average TTFF (Open Sky) Warm start: 27s average Hot start: 1s average General Specifications Operating Voltage 69g (2.43oz) Operating Temperature Operating Temperature Transmit Protocol TCP, UDP, SMS Scheduled Timing Report Report position and status at preset time intervals Geo-fence alarm and parking alarm, support up to 20 internal geo-fence regions Power On Report Report when the device is powered on Provide device power OBDII Port Cellular Antenna Internal only GNSS Antenna Internal only Internal only WiFi Antenna Internal only OBD, Cellular network, GNSS Used for upgrading and debugging Driving Behavior Monitoring Aggressive driving behavior detection, e.g. harsh braking and acceleration Crash Detection Accident data collection for reconstruction and analysis Alarm trigger based on built-in 6-axis accelerometer www.queclink.com [email protected]