GMT200 specifications Compact water resistant tracker with low current drain, designed for motorcycle and marine applications GSM Specifications Quad band: 850/900/1800/1900 MHz Compliant to GSM phase 2/2+ -Class 4 (2W @ 850/900 MHz) -Class 1 (1W @ 1800/1900 MHz) GPRS multi-slot class 10 GPRS mobile station class B RMS Phase Error 5 deg Max RF Output Power Dynamic Input Range Receiver Sensitivity GNSS Specifications General Specifications Dimensions Backup Battery Standby Time Without reporting: 140 hours 5 minute' reporting: 70 hours 10 minute' reporting: 90 hours Water Resistance IPX6 compliant Operating Voltage Operating Temperature Power Management Three working modes including zero current drain from vehicle when ignition is off GNSS Type u-blox All-in-One GPS receiver Autonomous: -147 dBm Hot start: -156 dBm Reacquisition: -160 dBm Tracking: -162 dBm Report position and status based on preset time Scheduled Report intervals, distance, mileage or a combination of these settings Cold start: 27s average TTFF (Open Sky) Warm start: 27s average Hot start: 1s average Geo-fence alarm and parking alarm, support up to 5 internal geo-fence regions Power On/Off Report Report when the device is powered on and off Alarm for tow event in ignition-off state Special Alarm Special alarm based on digital inputs Low Power Alarm Alarm when backup battery is low Remote Control OTA control of digital outputs Interfaces Digital Inputs 1 positive trigger input for ignition detection 1 negative trigger input for normal use Latched Digital Output 1 digital output with internal latch circuit, open drain, 150 mA max drive current Internal only Internal only Used for external power and c