LTE Cat M1/NB2 with 2G Fallback Micro Size Covert Installation 4 Years Standby Time BLE 5.2 IP67 compliant Power Saving Mode Continuous Mode Automatic Mode Switching LTE Cat M1/NB2 waterproof standby asset GNSS tracker supporting BLE 5.2 with up to 4-year standby time Dual Mode Anti-theft Alarm OTA Control Scheduled Timing Report Geo-fences 64.6 × 51.0 × 28.3mm 2.54” (L) ×2.00” (W) × 1.07” (H) Lithium manganese dioxide battery, 4400mAh Low Power Alarm Wakeup Report Motion Detection *Standby Time: 1 Report/Day 4 Reports/Day 5 Min Reporting Up to 4 years Up to 480 days Up to 16 days The GL53MG Plus is the upgraded LTE Cat M1/NB2 version of GL50MG. It integrates the latest low-power wide area network standards and covers a broader area, making it more flexible to deploy. Adding a programmable button makes it ideal for applications requiring rapid emergency alert or checking status of device. Its built-in BLE allows connectivity to diverse wireless accessories. Micro-sized waterproof design allows it to be used in harsh environments. The GL53MG Plus is an ideal product for SVR application requiring LTE technology. In addition, it is also used for a wide range of applications including auto financing, asset monitoring, car rental and leasing and more. Asset Monitoring Stolen Vehicle Recovery
Open the catalog to page 1Network/Operating Band GNSS Type All-in-One Receiver Power Button Interfaces Power Button Used for power on/off and working status checking Cellular Antenna Internal only GNSS Antenna Internal only BLE Antenna Internal only SIM Access Internal only (3FF SIM) LED Indicators Status, GNSS Air Interface Protocol Command Set @Track protocol command Transmit Protocol TCP, UDP, SMS Working Modes Power saving mode for long standby time Continuous mode for emergency tracking Scheduled Timing Report Report position and status at preset time intervals Geo-fences Support up to 20 internal geo-fence regions...
Open the catalog to page 2Configuration and Upgrade Cable UART Cable 0.5M It is used for configuration Model: GL53MG UART Cable 0.5M USB Cable 0.5M It is used for firmware upgrade Model: GL53MG USB Cable 0.5M
Open the catalog to page 33 Pages