CV200XEU/XNA - Intelligent 4G Dash Camera with Full Featured Telematics
5Pages

LTE Cat 6 with 50Mbps UL/300Mbps DL Full HD Front Camera Smart AI – ADAS/DMS (Optional)* H.265/H.264 Live Streaming Monitoring Crucial Recording Auto Upload Multi-language In-Cabin Alerts Real-time Positioning Driving Behavior Monitoring First Notice of Loss (FNOL) Report Auto Emergency Call Parking Mode OTA Control Intelligent 4G Dash Camera with Full Featured Telematics Battery Over-discharge Protection BT 4.2 + BLE 120 x 60 x 30mm (without bracket) 120 x 60 x 85mm (with bracket) Wi-Fi AP & Station Mode Power Input：8 ~ 32V DC, Built-in rechargeable battery The CV200 is Queclink’s second generation LTE Cat 6 smart dash camera combining with all-in-one telematics features. It can work alone, or be connected to an additional plug & play second camera to provide in-cabin view or cargo view. The powerful optional ADAS/DMS enhances the security level of fleet management system. The scalable IoT dash camera CV200 also supports wired physical I/Os or BLE to connect various peripherals. It is suitable for applications such as insurance claim negotiations, driver coaching, passenger compartment monitoring and accident reporting. Automobile Insurance Ride Sharing and Ride Hailing

Power_OUT Digital_Input GND ACC_IN Bracket Base With 3M Adhesive Tape Digital_Output Connector Definition Rotating Bracket (80° Rotation) Microphone Multi-function Button Reset Button Tamper-Resistant Cover SIM Card Slot Front Camera (fixed) Video/Audio Image Sensor Lens Resolution 2 Megapixel FHD RGB DFOV >140°, 6G+IR Cut Filter 1920*1080P Recording Quality Low/Middle/High adjustable On-screen Display Date & time, Vehicle Speed, Coordinates, G-sensor data, Logo Overlay External Storage Micro SD, UHS-1 256GB Max. FAT32 file system Recording Mode Continuous recording by cycle overwritten...

Network Model Operating Band GNSS Type EMEA, LATAM LTE CAT 6: LTE-FDD: B1/B2/B3/B4/B5/B7/B8/ B20/B28 LTE-TDD: B38/B39/B40/B41 WCDMA: B1/B2/B4/B5/B8 All-in-One GNSS Receiver North America All-in-One GNSS Receiver Connector Interface Power_ IN/ACC_IN/GND 1 x RS232 1 x DIN: Negative trigger 1 x DOUT: Open drain 4 PIN connector f or 1*additional camera Upgrade/Debug/Configuration / Data Transmission Micro SD Cellular Antenna Internal only GNSS Antenna Internal only Wi-Fi Antenna Internal only Internal only IMU Multi-function Button Reset Button 3-axis G-sensor + 3-axis Gyroscope Wi-Fi Switch /...

Additional Camera Accessories CV200XEU/XNA can connect a secondary camera to meet more diversified application needs such as the monitoring of cargo or cabin view and driver behaviour. DMS Camera Monitor the driver states to avoid the dangerous driving behaviors by vision algorithm Resolution Lens Night Vision B/W,IR Distance: 1 meter 940nm Video Signal Length: 0.57 meters Connector: 4PIN, Plug & Play Integrated With 3M Adhesive Tape & Screw Holes Dashboard Interior Camera Monitor the cabin or cargo Resolution Lens Night Vision Video Signal Length: 0.57 meter Connector: 4PIN, Plug & Play...

Waterproof Rear View Square Camera Monitor the rear view Resolution Lens Night Vision Video Signal IP69 Length: 0.57 meter Connector: aviation port Load Bay Mount, With Screws Waterproof Cargo View Dome Camera Monitor the cargo Resolution Lens Night Vision Video Signal IP65 Length: 0.57 meter Connector: aviation port Ceiling Mount, With Screws Configuration and Upgrade Cable CV100 Series Debug Cable It is used for configuration and debugging.