INFRARED REMOTE CONTROL

Product catalog summary

General Characteristics
The document describes an infrared remote control system with two controlled channels. The receiver is compact, making it suitable for use in limited spaces. It can be customized to fit specific housings and electrical configurations. The system supports up to eight transmitters, which can be encoded to ensure only authorized transmitters are recognized by the receiver.

Technical Features

Transmitter: Customizable coding, powered by a CR2032 battery, with a lifespan of up to 20,000 operations.
Receiver: Operates on 10 to 26 Vdc/ac with a maximum power consumption of 60mA. It features two output contacts, capable of controlling up to 5A at 24Vdc/ac on a resistive load, with a minimum relay switching time of 0.8 seconds.

Configuration and Maintenance
The receiver's DIP switches 1-2-3 must be configured to match the transmitter's settings. Setting DIP switch 4 to ON allows all transmitter codes to be accepted. Battery replacement is recommended annually, using a small tool to open the housing and ensuring the correct polarity when inserting a new CR2032 battery. Used batteries should be disposed of according to regulations.

Catalog excerpts

CUSTOM ELECTRONICS INFRARED REMOTE CONTROL Infrared remote control, two controlled channels. The small size of the receiver allow its use in a situations in which the available space is limited. The receiver can be customized to suit particular housings and conﬁgurations of the electrical connections. May be encoded up to eight transmitters. The transmitter can be customized with codes that allow the receiver to recognize only the enabled transmitters. GENERAL CHARATTERISTICS • Reduced dimensions of the receiver • Customizable transmitter coding • Up to 8 transmitters can be coded Via A. Ferrarin, 19-23 | 50145 Firenze – Italy | Tel: (+39) 055 3024555 | Fax: (+39) 055 317844

Open the catalog to page 1

CUSTOM ELECTRONICS INFRARED REMOTE CONTROL TECHNICAL FEATURES Transmitter Power supply Battery life Battery type Cr2032 Best of 20000 operations Receiver Power supply Power consumption Output contacts Controlled power Minimum relay witching time From 10 to 26 Vdc / ac Max 60mA N°2 no type 5A @ 24Vdc / ac on resistive load 0,8 seconds Conﬁgure the DIP switches 1-2-3 on the receiver, in the same way as the transmitter dip-switch. By conﬁguring the dip switches 4 of the receiver in ON position, all the codes of the transmitters will be accepted as valid. How to change the battery It is recommended...

Open the catalog to page 2

All QUANTA S.r.l. catalogs and technical brochures

DQ-A1000
2 Pages