DIA CLASS 70

DIA CLASS 70

DIA CLASS 70

Product catalog summary
Technical Specifications
The document outlines the specifications for the DIA CLASS series of deionizers, which are designed for laboratory analysis. Key specifications include:
  • Water production through reverse osmosis at 70 l/h under specified conditions (15°C, 800 ppm NaCl, pH 8.3, SDI 5).
  • Electrical and physical data such as voltage supply (230 Volt AC), grid frequency (50 Hz), and power consumption (0.8 KVA).
  • Water quality parameters including TDS, SDI, LSI, water hardness, chlorine concentrations, and resistivity.
  • Output water quality adheres to CLSI-CLRW standards.
Models and Components
The DIA CLASS series includes models 35, 70, and 120, each with specific production capacities and features. Components include pre-filter cartridges, mixed-bed resins, and optional kits like the degasser kit and UV lamp kit. The models are designed for easy installation, stability, and noiseless operation.
Features and Benefits
The DIA CLASS series offers maximum reliability and durability, high-quality water treatment, and a manufacturer guarantee. The series is noted for its automatic by-pass and remote/internet control capabilities, making it suitable for diagnostic laboratories.
Installation and Maintenance
The deionizers are equipped with features for easy installation and maintenance, including hot swap capabilities for consumables replacement. The document emphasizes the importance of correct operating and maintenance procedures to ensure optimal performance.
Contact Information
Quality Invents S.R.L. is the manufacturer, located in Arluno, Italy. Contact details include phone and fax numbers, as well as a website and email address for further inquiries.
See more

Catalog excerpts

DIA CLASS 70-1

CLASS EDITION DIA CLASS 70 TECHNICAL DETAILS The models from the DIA CLASS series represent the gold standard in laboratory analysis, especially where analyzers demand a guarantee of continued service. Thanks to sophisticated engineering technology combined with the top of the line components, the “Made in Italy” DIA line is paramount in the water treatment industry. As of 2016, approximately 2,000 units of this model of deionizer have been installed throughout Italy. This new DIA Class achieves a higher level of performance in terms of optimization of usage of disposables, warranty for continuous deionized water feeding, perfect adherence to CLRW standard requirements, and continually satisfying our customers most demanding needs and meeting their highest expectations for the past fifteen years. The automatic by-pass and remote/internet control of deionizers are among the features that make the DIA series the state of the art machines in all diagnostic laboratories. WATER SUPPLY: • TDS (verified chemical composition) • SDI (silt density index) • LSI (langelier saturation index) • Water hardness of CaCO3 • Chlorine concentrations • Water flow rate OUTPUT WATER ELECTRICAL AND PHYSICAL DATA: according to CLSI-CLRW (Ex NCCLS Type I and II) Volt AC: • TOC (total organic carbon) • Nominal flow rate • Water pressure • Grid frequency • Power consumption • Voltage supply * Subject to correct operating and maintenance procedures WATER PRODUCED FROM REVERSE OSMOSIS • Salt rejection • Applied pressure • Permeate flow Authorised distributor: 23 E. Ferrari str. 20010 - Arluno (MI), Italy Phone +39 02.901.72.24 Fax

 Open the catalog to page 1
DIA CLASS 70-2

highest quality SPECIFICATIONS DIA CLASS Reverse osmosis Reverse osmosis Reverse osmosis Reverse osmosis Estimated capacity of exchange (g of CaCO3) CHARACTERISTICS Deionizer type Number of pre-filters Mode of consumables replacement SUMMARY OF OPTIONALS, CONSUMABLES AND SUPPLIED COMPONENTS DIA CLASS Mixed-bed resins polishing unit IONtank Q-1000-10 0,22 µm filtration for particles and colloids Q-1000-28 DIAnetwork kit (multi-DIA connections) Q-1000-98 DIApressure kit (pressurization pump) Q-1110-21 QUALITY INVENTS TECHNOLOGY • Maximum reliability and durability • High quality water treatment...

 Open the catalog to page 2

All Quality Invents catalogs and technical brochures

  1. miniDIA Plus

    2  Pages

  2. miniDIA

    2  Pages

  3. DIA CLASS 120

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.