DIA CLASS 35/45

Product catalog summary

Technical Specifications
The document outlines the specifications for the DIA CLASS series of deionizers, which are designed for laboratory analysis. Key specifications include:

Water production through reverse osmosis at 35-45 l/h.
Water supply parameters: 800 ppm NaCl, pH 8.3, and SDI 5.
Electrical and physical data: Voltage supply at 230 Volt AC, grid frequency at 50 Hz, and power consumption at 0.8 KVA.
Output water quality adheres to CLSI-CLRW standards.

Models and Components
The DIA CLASS series includes models such as DIA CLASS 35, 45, 70, and 120, each with varying production capacities and features. Components include pre-filter cartridges, mixed-bed resins, and optional kits like the degasser kit and UV lamp kit.

Features and Benefits
The DIA CLASS series is noted for its high reliability, durability, and ease of installation. It offers stable and noiseless operation, with features like automatic by-pass and remote/internet control. The series is manufactured in Italy and has been installed in approximately 2,000 units across the country since 2016.

Optional and Consumable Components
The document lists optional and consumable components such as:

Pre-filter cartridges and mixed-bed resins.
Remote DIAnet and DIALink for connectivity.
DIAnetwork kit for multi-DIA connections.

Catalog excerpts

CLASS EDITION DIA CLASS 35/45 TECHNICAL DETAILS The models from the DIA CLASS series represent the gold standard in laboratory analysis, especially where analyzers demand a guarantee of continued service. Thanks to sophisticated engineering technology combined with the top of the line components, the “Made in Italy” DIA line is paramount in the water treatment industry. As of 2016, approximately 2,000 units of this model of deionizer have been installed throughout Italy. This new DIA Class achieves a higher level of performance in terms of optimization of usage of disposables, warranty for continuous deionized water feeding, perfect adherence to CLRW standard requirements, and continually satisfying our customers most demanding needs and meeting their highest expectations for the past fifteen years. The automatic by-pass and remote/internet control of deionizers are among the features that make the DIA series the state of the art machines in all diagnostic laboratories. WATER SUPPLY: • TDS (verified chemical composition) • SDI (silt density index) • LSI (langelier saturation index) • Water hardness of CaCO3 • Chlorine concentrations • Water flow rate OUTPUT WATER ELECTRICAL AND PHYSICAL DATA: • Grid frequency • Power consumption • Voltage supply according to CLSI-CLRW (Ex NCCLS Type I and II) Volt AC: • TOC (total organic carbon) • Nominal flow rate • Water pressure * Subject to correct operating and maintenance procedures WATER PRODUCED FROM REVERSE OSMOSIS • Salt rejection • Applied pressure • Permeate flow Authorised distributor: 23 E. Ferrari str. 20010 - Arluno (MI), Italy Phone +39 02.901.72.24 Fax

Open the catalog to page 1

highest quality SPECIFICATIONS DIA CLASS Reverse osmosis Reverse osmosis Reverse osmosis Reverse osmosis Estimated capacity of exchange (g of CaCO3) CHARACTERISTICS Deionizer type Number of pre-filters Mode of consumables replacement SUMMARY OF OPTIONALS, CONSUMABLES AND SUPPLIED COMPONENTS DIA CLASS Mixed-bed resins polishing unit IONtank Q-1000-10 0,22 µm filtration for particles and colloids Q-1000-28 DIAnetwork kit (multi-DIA connections) Q-1000-98 DIApressure kit (pressurization pump) Q-1110-21 QUALITY INVENTS TECHNOLOGY • Maximum reliability and durability • High quality water treatment...

Open the catalog to page 2

All Quality Invents catalogs and technical brochures

miniDIA Plus
2 Pages
miniDIA
2 Pages
DIA CLASS 70
2 Pages
DIA CLASS 120
2 Pages