■is Wall Mounting Multiple Color LED Steady/ Flashing Signal Lights New innovative LED signal light that can be configure with 2-3 colors in 1 signal lamp O SWTC/ SWTCE Wall Mounting Multiple Color LED Steady/ Flashing Signal Lights • Cost effective model which transfers two or three signals with one lamp • Wide angle lens structure provides excellent visibility in all directions • Excellent visibility by adopting direct LED light radiation structure • Tightly sealed structure allows outdoor installation • Lens Colors Arrangement Two colors : •Red •Green Three colors : •Red •Amber •Green • Built-in buzzer available (Volume Max 90dB at 1m) • Materials : Lens-PC, Body-ABS, Filter Lens-PC, Cover-ABS • Ambient operating temperature : -30°C to +50°C • Protection rating : IP55 • Certificates : CE Compliant • Compliant with RoHS directive Technical Diagram (Units : mm) Wiring Instructions • External power line standard : UL1015 AWG18(0.75sq)*2C 400mm • Signal line : UL1007 AWG22(0.3sq) 400mm * Please refer to page 112 for detailed wiring information. • Special color combination • 2 buzzer sound types : Both prolonged(beep, beep) and staccato(beep, beep, beep) buzzer output available • swtcl • swtclf • swtcel • swtcelf • None - No buzzer • BZ - Built-in buzzer Semi circular design allows for convenient wall mount [Voltage] | • 12-DC12V • 24-DC24V • 110-AC110V • 220-AC220V RAG [Color] | • R-Red • A-Amber • G-Green

SWTC series Wall Mounting Multiple Color LED Steady/ Flashing Signal Lights Wiring Instructions • SWTC series can be wired with external contacts and transistors • In case of wiring with transistors, please select the proper transistor type : Either NPN or PNP based on the source voltage setting • Please wire properly based on the technical diagram • Product can be wired regardless of polarity By external contact EXTERNAL CONTACT Red(R) EXTERNAL TRANSISTOR-NPN Red(R) Amber(A) Green(G) Brown(BN) Green(G) Buzzer Red(R) Amber(A) Green(G) Common Buzzer Steady Amber(A) Common Green(G) Flash Red(R)...