Qlight Explosion Proof LED Tower Lights Flame Proof Housing PI QTEX - Standard model Explosion proof LED tower lights with flame proof housing • Explosion proof LED tower lights with Ex d IIC rating can be used in explosive gas environments • Excellent distance visibility by using a special reflector to aggregate the light from the LED filament • 080 LED tower light mounted inside the flame proof housing • Aluminum housing provides excellent durability • Long-lasting high intensity LED light source • Terminal box located inside the housing for easy power wiring • Direct mount type and wall mount type available depending on application needs. • Flashing rate: 60-80 flashes/min • Selectable between steady/flashing mode with proper wire arrangement • Sound volume : Max 80dB at 1m(QTEXB Type) • Lens colors arrangement : •R-Red •A-Amber •G-Green •B-Blue •W-White • Standard housing color : Silver • Cable entry : 3/4" NPT • Materials : Lens-Tempered glass, Filter lens-AS, Housing-Al, Reflector-Heat resistant ABS • Certificates : lECEx, ATEX, KCs • Protection rating : Ex d HC T6 Gb, IP66 • Ambient operating temperature : -40°C < Tamb < +60°C H QTEX Explosion Proof LED Tower Lights with Flame Proof Housing QTEX Direct mount type Model number Layer • R-Red • G-Green • R-Red • A-Amber • G-Green • R-Red • A-Amber • G-Green • B-Blue Signal Tower Lights USB/ETN Signal Tower Lights Wireless Network System Wall mount type Hazardous Area Classification 0 Zone 0 : Dangerous status Ignitable concentrations of flammable gases or vapors which are present continuously or for long periods of time. ^ Zone 1 : Normal status Ignitable concentrations of flammable gases or vapors which are likely to occur under normal operating conditions. £ Zone 2 : Abnormal status or places Ignitable concentrations of flammable gases or vapors which are not likely to occur under normal operating conditions and do so only for a short period of time.

Explosion Proof LED Tower Lights with Flame Proof Housing plifji □ QTEXB Built-in Siren Buzzer Type Explosion Proof LED Tower Lights with Flame Proof Housing QTEXB - Built-in buzzer type • Explosion proof LED tower lights with visual & audible signal that can be used in hazardous environments • Sound tone & volume : Siren buzzer, Max 80dB at 1m QTEXB Direct mount type Model number Layer • R-Red • G-Green • R-Red • A-Amber • G-Green • R-Red • A-Amber • G-Green • B-Blue Explosion proof structure for buzzer model Siren Buzzer Flame Arrester What is a Flame Arrester? A flame arrester(also called...

QTEX series Explosion Proof LED Tower Lights with Flame Proof Housing Technical Diagram (Units : mm) Warning/ Signal/ Stackable Signal & Electric Horn/ Speakers Vessels and Heavy-Duty Equipment Explosion Proof Buzzer is located on the bottom of the product in case of buzzer type model(QTEXB) QTEX/ QTEXB - Wall mount Ø144 74 54.5 Aviation Obstruction Lights Signal Tower Lights USB/ETN Signal Tower Lights Buzzer is located on the bottom of the product in case of buzzer type model(QTEXB) Cautions in using explosion proof tower lights • Explosion proof products should be maintained by explosion proof...

QTEX series Explosion Proof LED Tower Lights with Flame Proof Housing Wiring Instructions • QTEX/ QTEXB wiring with transistors and external contacts. • In case of wiring with transistors, please use PNP transistors and wiring exactly following below technical diagram. • Product can be wired regardless of polarity. External contacts type Transistor type Blue White Orange Violet Orange Fuse Power (Current) Power (Current) Terminal Wiring Information 1Layer(RED LED) 2Layers(AMBER LED) 3Layers(GREEN LED) 4Layers(BLUE LED) 5Layers(WHITE LED) Buzzer Flashing common Steady common Power QTEX series...