video corpo

Retiga-2000DC - 2 Pages

Add to MyDirectIndustry favorites

Catalog excerpts

PRODUCT DATASHEET Deep-Cooled, High-Dynamic-Range Digital CCD Camera The QImaging® Retiga-2000DC CCD digital camera has been specially engineered for low-light, high-dynamic-range, high-speed applications. An 80,000e- full well capacity, combined with a three-stage Peltier device using an all-metal, hermetic-vacuum-sealed CCD chamber, provides extreme dynamic range for applications such as live-cell imaging, forensics, and fluorescence. The camera’s software-selectable regulated cooling enables precise control in single-degree increments down to -45˚C. The Retiga-2000DC features Black-Out Mode Reduction™ (HPR) technology, an innovative combination of a deep-cooled vacuum design High-Speed Readout a 1.92-megapixel CCD, 12-bit digital output, and an IEEE 1394 interface for enhanced connectivity and noise-shielding performance. Additionally, the camera comes with Hot Pixel Ultimate reduction of hot pixels Turns all lights off for low-light imaging applications Highly detailed, sharp images Previewing & focusing in real time 190fps maximum frame rate < 10fps full resolution @ 12 bits < Ideal for automated imaging applications < and FPGA-based pixel clock timing that offers unbeatable performance in terms of dark current and generation of hot pixels. Low-Noise Electronics camera models Optional/Removable IRCutoff Filter Flexible Exposure Control from 10μs to 17.9min External Sync & Trigger Three-Stage Peltier Cooling w/ Vacuum Seal Includes: IEEE 1394 FireWire cable, IEEE 1394 PCI card, power supply, hex key, QCapture Suite software, and access to SDK Monochrome Retiga-2000DC: camera options Removable IR-Cutoff Filter RGB Color Filter for monochrome cameras (F-mount interface required), refer to data sheet for more details Extended Warranty Quantitation & imaging of low light levels High-contrast, visible-range images with IR filter in place Removable for IR applications Optimal integration over a wide range of light levels Tight synchronization with flashlamps, automated filters, shutters, & microscope stages Reduced thermal noise for low-light, long exposures Increases sensitivity for quantitation & imaging of very low light levels Increases frame rate Simple connectivity Better noise performance < Excellent connectivity ability < Ease of use & installation < Portability with laptop computer < Simultaneous use of multiple cameras through a single port IEEE 1394 FireWire Connection Extensive Application Software Support Choose from a large selection of life science & industrial software for microscopy, machine vision, & video-streaming funct

 Open the catalog to page 1

Light-Sensitive Pixels Binning Modes From 1x1 pixels up to full resolution, continuously variable in single-pixel increments Fluorescent protein imaging Forensic analysis Exposure/Integration Control Sensor Type Kodak® KAI-2020 progressive-scan interline CCD (monochrome) Pixel Size Linear Full Well Read Noise Dark Current Cooling Technology Three-stage Peltier cooling with all-metal, hermetic-vacuum-sealed chamber assembled in a Class 10,000 cleanroom Quantum Efficiency (%) spectral response Cooling Type Down to -45˚C, regulated, with software control in 1˚C increments Digital Output Readout...

 Open the catalog to page 2

All QImaging catalogs and technical brochures

  1. Rolera MGi Plus

    2 Pages

  2. Rolera EM-C2

    2 Pages

  3. wLS

    2 Pages

  4. QCapture PRO 7

    2 Pages

  5. QI674

    3 Pages

  6. QI695

    3 Pages

  7. QI825

    3 Pages

Archived catalogs