SAEU3H Multi-channel Acoustic Emission Detection System SAEU3H multi-channel AE system is composed of a multiple of 4-channel acoustic emission acquisition boards, SAUE3H chassis, AE sensor, AE preamplifier, SWAE software and other accessories. Working principle: The AE sensor converts the acoustic waves signal of material into electrical signals through piezoelectric effect, and the preamplifier amplifies the electrical signals from the sensor to increase the signal-to-noise ratio of the signal to facilitate signal transmission. The AE board performs A/D conversion, processing and analysis of the signal, and then displays and further processes the AE data through SWAE software. SAEU3H multi-channel AE system is independently developed and produced by Qingcheng AE Institute. The product uses USB3.0 communication mode to connect the acoustic emission instrument to the computer, with a data pass rate of up to 600MB/s. SAEU3H system's strong data acquisition and data processing capabilities are applicable to most of the industrial testing applications, as well as to the waveform data requirements of laboratory material research and other fields. AE Preamplifier The role of the preamplifier is to amplify the tiny electrical signals from the sensor to improve the signal-to-noise ratio of the signals so that they can be transmitted over long distances. Qingcheng offers two different models of preamplifier, PAS3 and PAV. Storage tank floor corrosion using SAEU3H System AE sensor is used to convert the acoustic waves on the material surface The accessories of SAEU3H acoustic emission system mainly include: into a voltage signal through the piezoelectric effect. There are various magnetic hold-downs, coaxial cable, preamplifier power supply & signal types of AE sensors including general resonant sensor, integral preamplifier separator, waveguide etc. For more information, please visit our website sensor, wideband sensor, intrinsically safe sensor, high temperature sensor and also accept the special customized sensor according to the needs of customers. Addr.: 601-9, Building 3, 232 Kezhu Road, Huangpu District, Guangzhou, Guangdong, China Specifications subject to change without notice. Copyright © 2026 QAWRUMS LTD. All Rights Reserved.

m infQAWRUMS SAEU3H Multi-channel Acoustic Emission Detection System AE Acquisition Board The AE board adopts the design of 4 channels per board. Each channel has an independent ADC of 10MS/s and 16-bit, high-speed FPGA chip signal processing, and 1GB independent cache card to ensure no data loss. Unique hardware real-time digital filter, freely control the signal width. There are three kinds of chassis, 4-channel, 20-channel and 48-channel chassis respectively. The 20-channel and 48-channel chassis adopts high-grade PXI plug-in function module structure, which can be used with different quantities...