Catalogs >
QAWRUMS Ltd. >
SAEU3H Chassis Panel Introduction

SAEU3H Chassis Panel Introduction
3Pages

Catalog excerpts

SAEU3H Chassis Panel Introduction Fig.1 48-channel Chassis Front Panel ① Network communication board：optional and detachable. For data communication between the unit and analysis software. ② EX-parameter 4-channel AE board：optional and detachable. For AE parameter and external parameters collection. side is preamplifier status indicator. After the AE board is correctly identified, the preamplifier status indicator will light up. ⑤ Female RJ45 connector ⑥ 16-pin LEMO connector ③ Standard 4-channel AE board：detachable. For AE parameters collection. ⑦ C5 LEMO connector: connect with AE sensor. ④ Channel indicator: There are 8 indicators on each AE board, and 2 indicators for each channel ⑧ Chassis status indicators from top to bottom; The green light on the left is the signal threshold indicator, which will shine ⑨ Number： Indicates the number of AE boards ahead of this chassis when the chassis is cascaded. when the threshold is triggered by the acoustic emission signal; The yellow light on the right ⑩ Cover board: detachable. Extra AE board could be inserted when t

Open the catalog to page 1

Acoustic Emission Instrument (tiiJifi/MANUF: JS«J*£W®F% {f ffl)^ QingCheng AE institute(Guangzhou)Co. Ltd. WJlt/Wcbsiie:»*w. ae-ndt. con © Power status indicator @ Switch © Power supply connector: AC 100-240V/50-60Hz. @ Ground connector © UP HDMI connector: For connecting with previous chassis when the chassis is cascaded. © DN HDMI connector: For connecting with latter chassis when the chassis is cascaded. @ USB connector: For data communication between the unit and analysis software.

Open the catalog to page 2

Power switch. Signal sampling indicator: when sampling signals, this indicator light up. Preamplifier status indicator: After preamplifier is correctly identified, indicator will Power indicator. Signal threshold indicator: which will shine when the threshold is triggered by the acoustic emission signal USB connector: For data communication between the unit and analysis software. C5 LEMO connector: connect with AE sensor. Power supply conne

Open the catalog to page 3