MODULAR HOT MOUNTING PRESS FAST MOUNTING CYCLE MOUNTING  –  MODULAR HOT MOUNTING PRESS  –  QPRESS 50 The Qpress 50 is designed for fast mounting including a pre-heat function and safes significantly time compared to other hot mounting presses. MODULAR DESIGN The basic unit, consisting of control and pressing unit, can be extended as required by 1 additional pressing unit Qp 50 (Qpress 50-2) or by 1-3 additional pressing units Qp 50 (Qpress 50-4). These units are separated from the basic unit and can also be added later. This allows to generate samples of up to 4 different diameters simultaneously in one modular device. The Qpress 50 is a modular hot mounting press for fast and simultaneously independent mounting of different materialo raphic specimens. Due to g its modularity the Qpress 50 can be configured ideally to the specific customer’s needs; e.g. the specimens can differ in size and material. The 7“ touch screen with intuitive software contains user account management, pre-installed recipes and user-defined maintenance tasks and more. The device combines fast mounting and high energy efficiency in a robust powder-coated steel case. USER SAFTEY IMPROVED SLIDING CLOSURE An integrated exhaust device (Dust Guard) protects the operator from inhaling expired fine dust during filling the moulds with mounting resin. The multi-functional button indicates the selected mounting unit, the operation state of the pressing unit and facilitates the operation of the whole unit. The 7“ touch display with control software consists of pre-installed mounting methods, consumables and offers the storage of more than 200 user-defined mounting methods. The user account management can be used to set different user accounts with diverse access and operator limits. In addition to that, user-defined maintenance tasks and cooling modes can be edited. For easy operation a single-hand closure system has been evolved. By closing the sliding closure with suction nozzle, excess granulate is transported into a detachable shelf (dirt trap). The closure can be lifted up to clean the upper ram easily. Secure closure is given by self-locking under pr

BASIC MODULE I modular hot mounting press I  basic unit with hydraulic mounting press and control interface for modular extension I  fast mounting with low power consumption I  proven one-hand closure system with integrated dirt trap (granular shelf to collect excess granulate) and suction nozzle I  Dust Guard: removal of fine dust during filling of mold I  touch display with innovative control software 7“ I  igh flexibility due to customized h preheating function - cooling modes - maintenance tasks I  user accounts with definable access rights I  robust steel construction, powder coated Basic...

MOULD ASSEMBLY MOUNTING  –  MODULAR HOT MOUNTING PRESS  –  QPRESS 50 I cylinder, upper and lower ram Equipment 1 Mould size without chamfer Order No.: with chamfer Order No.: without chamfer Order No.: with chamfer Order No.: VACUUM CLEANER Qpress 50 Qpress I    xtern e BASIC SET Qpress 50 Motor ACCESSORIES RECIRCULATION COOLING UNIT Recirculation cooling unit System cooling unit

Temperature range Heating time Cooling time MOUNTING  –  MODULAR HOT MOUNTING PRESS  –  QPRESS 50 Heating power BASIC UNIT WxHxD ADDITIONAL PRESSING UNIT WxHxD Connected load (basic unit) Connected load (addit. pressing unit) Power supply

MODULAR HOT MOUNTING PRESS Please refer to step 1 - 5 1. CHOOSE BASIC UNIT Qpress 50-2 MODULAR HOT MOUNTING PRESS 2. CHOOSE MOULD ASSEMBLY FOR BASIC UNIT 200-240 V, 50/60 Hz Mould size without chamfer with chamfer without chamfer with chamfer 4. CHOOSE ADDITIONAL PRESSING UNIT QP 50 Note correct voltage 200-240 V, 50/60 Hz 5. CHOOSE MOULD ASSEMBLY FOR ADDITIONAL PRESSING UNIT QP 50 200-240 V, 50/60 Hz with chamfer without chamfer with chamfer Mould size without chamfer For Qpress 50-4 repeat step 3, 4