*mydirectindustry

Catalogs
QATM
Qpol 30 - Mobile Grinder and Polisher

Qpol 30 - Mobile Grinder and Polisher

Product catalog summary

Overview: The Qpol 30 is a transportable grinder and polisher designed for manual operation, offering flexibility and precision in grinding and polishing tasks.

Accessories: The device can be enhanced with a reduction gear unit to increase torque. Grinding and polishing cloths can be attached at right angles or 45° using rubber carriers with Velcro fastenings.

Operation: The Qpol 30 features a simple operation with speed displayed on a digital screen. The motor is controlled via a jog switch on the handpiece, and the speed is adjustable from 1,000 to 40,000 rpm, maintained constant by a micro-computer.

Specifications: The basic module includes an electronic control unit with a connector for two micromotors, powered by a 230 V / 50-60 Hz supply. The dimensions are approximately 130 x 97 x 254 mm, and it weighs 2.3 kg.

Reduction Gear: Two options are available: one increases torque by 4x with speed reduced to ¼, and another increases torque by 15x.

Rubber Carriers: Available in different sizes for grinding papers and polishing cloths with Velcro or PSA fastening.

Micro Motors: Two models are available, ENK-250 T with speeds of 1,000-25,000 rpm and ENK-410 S with speeds of 1,000-40,000 rpm.

Additional Accessories: Includes a pedal switch, a straight handle for coarse pre-grinding with a rubber coating for grip, and angle parts available at 45° and 90°.

Catalog excerpts

MOBILE GRINDER & POLISHER The pressure applied is registered by a micro-computer and the speed is kept constant. The speed is infinitely adjustable from 1,000 - 40,000 rpm. The torque can be greatly increased by using an additional reduction gear unit. Grinding and polishing cloths can be attached at right angles or at 45° angles with the use of rubber carriers with Velcro fastenings. The Qpol 30 is a transportable grinder and polisher designed for manual operation. BASIC MODULE ELECTRONIC CONTROL UNIT I connector for 2 micromotors Power supply Speed is shown on the display. The motor is switched ON/OFF by the jog control switch on the hand piece. SIMPLE OPERATION MOBILE GRINDER & POLISHER

Open the catalog to page 1

ACCESSORIES MICRO MOTOR ENK-410 S 02 I increasing of torque 4x I speed reduced to ¼ I increasing of torque 15x I speed reduced to MOBILE GRINDER & POLISHER Fixing system Fixing system STRAIGHT HANDLE PEDAL SWITCH I for coarse pre-grinding I rubber coating for ideal grip Fixing system I for grinding papers and polishing cloths with Velcro fastening I for grinding papers and polishing cloths with Velcro fastening I for grinding papers and polishing cloths with PSA

Open the catalog to page 2

All QATM catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list