Touch-Screen display for the QATM-Software control is easy to read thanks to smart phone technology and even easier to operate. Compact program sequences are easy to compile and therefore enable automated program sequences. Update and backed-up possible via USB. With the “Multi-Position-Process” (MPP) you can place multiple specimens on the table and cut them in one sequence. The teach-in function enables a simple and user-friendly setting of various cutting positions. The 5-axis cutting robot Qcut 430 BOT has 2 additional axes (D, E-axis). This allows the specimen to be positioned and cut automatically in a single operation in nearly any position to the cutting wheel. The device has all the features of the proven Qcut 500 A universal wet abrasive cut-off machine and meets the highest demands on space available and cutting operations. The cuts can be precisely positioned without reclamping, so complicated instructions for cutting as well as the number of clamping tools and cutting failures are minimized. Full automation makes the entire process effectively and efficiently. REMOTE MAINTENANCE Using your existing broadband Internet connection, QATM provides an online fault diagnosis and operator support. In addition to the type of cut, variable pulse-cut feed can also be selected. Rhythmic pulsed feed ensures regular cooling and removal of cutting debris from the sample.

BASIC MODULE automatic table (X-axis) automatic cutting wheel movement (Y-axis) automatic touchdetection automatic cross feed (Z-axis) highly dynamic drive up to 80 mm/sec. parallel setting of wheel guard during vertical cutting sequences increases cutting capacity economical cutting feed by control of the cutting speed and soft start control variable pulse-cut feed variable speed incl. cutting wheel arbout with wear ring optimal chamber illumination manual control of X-/Y-/Z-axis via an industrial joystick automatic central lubrication (6 bar compressed air required) Touch-Screen display and...

I determination of cut-off wheel diameter before each cutting process with a laser I automatic control of cutting speed and cutting depth Order No.: A1832014 COOLING AND FILTER SYSTEMS Equipment 1 Recirculation cooling unit Belt filter system 285 I incl. filter roll 100 ltr./min (referring emulsion) 100 ltr./min Filter fleece width WxHxD Filter area Tank Filter capacity Order No.: A6501002 Anschluss-Set 275 I for belt filter system please order connection set Order No.: Z6501000 OPTION CENTRIFUGAL SEPARATOR I to remove coolant mist I increases quality of illumination I suction output 425 or 500...

BASIC SET QCUT 430 BOT QCUT 430 BOT Cut-off wheel Arbour size Vertical movement X-axis automatic (horiz. movement) Y-axis automatic (vertical cut) Z-axis automatic (parallel cut) (Option) D-axis automatic (option) E-axis automatic Motor cut-off wheel Connected load Clamping example Variable speed Power supply WxHxD