CUT-OFF MACHINE CUT-OFF MACHINE The integrated standstill monitoring allows opening only when the cutting wheel is not rotating. The Qcut 250 M is an especially user-friendly wet abrasive cut-off machine with manual cut-off. Opening the machine folds away the hood to the inside so that the whole cutting chamber is easily accessible. The round window opens a wide field of view during the cutting process. The cutting wheel cooling is integrated directly into the wheel guarding cover. The large, stainless table is equipped with replaceable wearing plates. Transverse grooves allow optimized alignment of clamping vices (e. g. clamping vice 80). FINE DYNAMIC CUT-OFF The manual cutting movement of the Y-axis is executed precisely and jerk-free via lever. Length and angle of the lever are adjustable. Further, the cutting depth can easily be adjusted by using a limiter. ILLUMINATION Through the large rounded window, the cutting chamber is comfortably visible. For direct lighting, the Qcut 250 M can be equipped with a flexible LED light.

BASIC MODULE CUT-OFF MACHINE I manual vertical movement I simple operation I opening on left- and righthand side for continuous long materials I large table with replaceable wearing plates I large hood for optimal accessibility I latest safety standard with door interlocking system I solid aluminium design, powder coated I optional LED lamp I Easy-nut EQUIPMENT POWER SUPPLY Equipment 1 ACCESSORIES RECIRCULATION COOLING SYSTEM I 2-chamber-pvccompartment 45 ltr. I inlet sieve and filter bag I incl. connection set I controlled by cut-off machine I mobile I mobile, with insertion mechanism for System...

CENTRIFUGAL SEPARATOR Cutting capacity Arbour size Vertical movement ~ 155 mm (depends on cut-off wheel) 350 x 288 mm CUT-OFF MACHINE Cut-off wheel I to remove coolant mist I increases quality of illumination I exhauster power 180 or 215 m3/h (depends on power supply) Ø 90 mm - 25 mm long parts Ø 55 mm for continuous long parts Ø 254 mm/10“ Motor cut-off wheel Connected load Power supply