video corpo

Brillant 285
4Pages

{{requestButtons}}

Catalog excerpts

Brillant 285 - 1

Industry wet abrasive cut-off machine OPERATION Touch-Screen display for the ATM-Software control is easy to read thanks to smart phone technology and even easier to operate. Compact program sequences are easy to compile and therefore enable automated program sequences. An unlimited number of passwordsecured program sequences can be updated and backed-up via USB. B R I L L A N T 2 85 The industrial wet cut-off machine BRILLANT 285 meets the through the swing arm, the cutting chamber is ideally put to use. highest of demands on space available and possibilities for Parallel setting of the wheel guard during vertical cutting cutting with its innovative concept for design, construction and sequences increases the cutting capacity considerably. The large front and hinged door with safety lock enable access A water-cooled 15 kW main motor is integrated into the swing to the machine table with longitudinal and cross T-slots. The side arm and the automatic horizontal table (X-axis) and cutting door allows easy and convenient change of the cut-off wheel wheel movement (Y-axis) can reach up to 80 mm/sec. through if Z-axis is set on the hard right position. Recirculating cooling highly dynamic axis drives in rapid-run. With a totally new and automatic central lubrication systems are integrated into the approach with the automatic cross-feed movement (Z-axis) robust welded steel construction body of the machine. CONTROL A wide range of cutting procedures is at your disposal for the very best cutting results. Through the combination of this unlimited range of positions, series cuts or differing cut sequences can be made into reality. The cutting process is rightly supported by controlled cut-off wheel revolutions which can be held constant through an optional wheel measurement facility. Control of the cutting speed and a soft start control serve additionally for an economical cutting feed. Manual control commands in the X-/Z-/Y-axes are also possible using an industrial joystick. The operator console can be slid either to left or the right.

Open the catalog to page 1
Brillant 285 - 2

Industry wet abrasive cut-off machine TYPES OF CUT Travel and cutting wheel offer a wide-ranging repertoire of types of cut through different combinations. In addition to the linear diagonal cut, the layer and segment-cuts are recommended for gentle cuts. The layer-cut is well-suited for cutting taller and longer objects as well as solid material. The segment-cut is especially suitable for large objects and hard materials. MULTI-POSITION PROCESS MPP With the “Multi-Position-Process” (MPP) you can place multiple specimens on the table and cut them in one sequence. The teach-in function...

Open the catalog to page 2
Brillant 285 - 3

Industry wet abrasive cut-off machine BRILLANT 285 POWER SUPPLY Equipment 1 400 V/50 Hz (3Ph/N/PE) Order No.: A1831000 WHEEL GUARD Equipment 1 Cut-off wheel 0 508 mm/20" Order No.: A1831001 COOLING AND FILTER SYSTEMS Equipment 1 Recirculation cooling unit Equipment 2 Belt filter system 285 Pump approx. 100 ltr./min » integrated, mobile » multi chamber filtration » exchangeable filter fleece, filter performance up to 90% Filter capacity 100 ltr./min Filter fleece width 710 mm » incl. filter roll Connection set 285 Order No.: Z6501007 » for belt filter systems please order connection...

Open the catalog to page 3
Brillant 285 - 4

Industry wet abrasive cut-off machine BRILLANT 285 OPTION ROTATING TOOL on request » tool with vertical rotary feed, parallel to wheel » angle input via software control Order No.: A1831004 » laser line to visualize the cutting line » laser class 1 Cut-off wheel Power supply Weight ~ 1600 kg (depends on equipment) use with cut-off wheel * 0 508 mm or ** 0 610 mm

Open the catalog to page 4

All QATM catalogs and technical brochures

  1. Opal X-Press

    8 Pages

  2. Brillant 3D

    4 Pages

  3. Brillant 240

    4 Pages

  4. KRISTALL 680

    4 Pages

  5. KRISTALL 650

    3 Pages

  6. Saphir Vibro

    3 Pages

  7. OPAL 480

    3 Pages

  8. OPAL 410

    3 Pages

  9. Topas 130

    2 Pages

  10. Saphir 375

    3 Pages

  11. Saphir 360

    2 Pages

  12. Saphir 350

    2 Pages

  13. Brillant 200

    3 Pages

  14. Brillant 220

    5 Pages

  15. Brillant 230

    4 Pages

  16. Brillant 250

    4 Pages

  17. Brillant 275

    4 Pages

  18. JADE 700

    2 Pages

  19. Brillant 255

    4 Pages

  20. OPAL 460

    3 Pages

  21. SAPHIR 300

    2 Pages

  22. Brillant 265

    4 Pages

Archived catalogs

  1. Brillant 240

    4 Pages