Catalogs >
QATM >
Brillant 255 - Cut-Off Machine

Brillant 255 - Cut-Off Machine
4Pages

Catalog excerpts

CUT-OFF MACHINE MANUAL VERTICAL MOVEMENT MANUAL HORIZONTAL MOVEMENT The manual horizontal movement allows cutting long parts longitudinally. The universal wet abrasive cut off machine Brillant 255 with manual travel and fine dynamic cuting allows precise, soft touch cutting with 2 axes in arbitrary directions (Y/X axis) and can be equipped with a manual Z-axis for parallel serial cuts (option). Side openings allow cutting continuous long parts in the spacious cutting chamber of this solid and powder-coated aluminium construction. Complex geometric shaped samples can be fixed securely on the T-slot table using our reliable clamping systems. The vibration reducing design of the cutting arm allows a low noise cutting process. Our approved LED cutting chamber illumination is energy saving, damage resistant and guarantees optimum illumination of the cutting chamber. MANUAL CROSS FEED The Z-axis is integrated in the table, and a measured parallel slice can be set using the hand wheel with scale. The height of the cutting wheel does not need to be altered when setting the Z-axis dimension. SAFETY Integrated safety protection only allows the automatic doors to be opened when the cutting wheel has stopped rotating. LASER ALIGNMENT With line laser you can display the scheduled cut on the sample. This helps to define the exact cutting position. Cutting force can be regulated precisely and with little effort by using the wheel spider. The wheel hight can be locked at each point of the wheel spider rotation. CUT-OFF MACHINE

Open the catalog to page 1

BASIC MODULE Brillant 255 CUT-OFF MACHINE I manual horizontal movement with handle I manual, fine dynamic cut-off with lateral wheel spider I spacious cutting chamber with large T-slot table I openings on the left and right for continuous long parts I sliding door I current safety standard with door interlock (safety protection) I cutting wheel arbour with wear ring I optimum cutting chamber illumination with LED I solid aluminium construction, powder coated I Easy-nut for quick and easy exchange of cutting wheels EQUIPMENT POWER SUPPLY Equipment 1 TABLE DRIVE Equipment 1 Without Z-axis...

Open the catalog to page 2

EQUIPMENT COOLING AND FILTER SYSTEMS Equipment 2 Recirculation cooling systems Belt filter system 285 I incl. filter roll 100 ltr./min (referring emulsion) 100 ltr./min Filter fleece width WxHxD Filter area Tank Filtering capacity CUT-OFF MACHINE I integrated I inlet sieve with filter bag (see consumables) Order No.: A6501001 Connection set 285 I for belt filter system please order connection set Order No.: Z6501003 OPTION CENTRIFUGAL SEPARATOR I to remove coolant mist I increases quality of illumination I exhauster power 425 or 500 m3/h depends on power supply I laser line to visualize the...

Open the catalog to page 3

PULSED CLAMPING SYSTEM I parallel, continuous serial cuts of 5–130 mm width I clamping and adjusting of sheet material up to 20 mm thickness in Z-direction I max. material width (cutting length) 300 mm with cut-off wheel Ø 350 mm SPECIFICATIONS Max. cutting capacity 1 2 Cut-off wheel Manual I for manual Z-xis Order No.: Z1841010 CUT-OFF MACHINE Arbour size Vertical movement 170 mm (depends on cut-off wheel) 365 mm Ø 150 mm (depends on cut-off wheel) Ø 356/14“ mm Ø 406/16“ mm Ø 32 mm 550 x 375 mm (without Z-axis) 420 x 375 mm (with Z-axis) 12 mm Motor cut-off wheel Connected load Speed Power...

Open the catalog to page 4