SIS+ Series

Product catalog summary

Introduction
The SIS+ Series by Q-Pumps is a sanitary internal seal pump designed for the beverage industry and low-viscosity products. It offers superior performance with features that enhance cooling, reduce cavitation, and ensure a constant flow.

Specifications
- Internal seal submerged for cooling
- Operates at low RPM to prevent product deterioration
- Increased seal closing force to minimize solid agglomeration
- Reduces damage from water hammer, extending seal life
- Hydraulically and dimensionally interchangeable with QC/C series pumps
- 3-A certified

Conversion Kits
Two kits are available to convert QC+ pumps into SIS+ pumps:
- SIS+1 Kit: Replace internal seal, back cover, casing gasket, and impeller.
- SIS+2 Kit: Compatible with QC/C series, replace internal seal, stuv shaft, impeller, and back cover.

Materials and Design
- Manufactured in 316L stainless steel
- Semi-open impeller
- Internal and balanced mechanical seal
- Various port options
- Scroll casing with center suction
- O-ring options: Buna, Viton, EPDM

Model Specifications
Models range from SIS+ 114 to SIS+ 6410, with varying inlet and outlet sizes and maximum impeller dimensions.

Performance Charts
The performance charts illustrate the pressure and capacity at different RPMs (1750 and 3500 RPM), showing the capabilities of various SIS+ models in terms of pressure (ft) and capacity (gallons per minute).

Catalog excerpts

SIS+ SERIES SANITARY INTERNAL SEAL PUMP FOR SUPERIOR PERFORMANCE

Open the catalog to page 1

SIS+ SERIES At Q-Pumps we have been designing pioneering solutions for each application for more than 20 years, therefore we have created the SIS+ Series especially for the beverage industry and low-viscosity products (<600 cP). ADVANTAGES • The internal seal is submerged inside the product to promote cooling, which reduces cavitation and provides a constant flow. • Can run at low RPM to prevent deterioration of the product. • The pressure inside the pump generates greater closing force on the faces of the seals, minimizing agglomeration of remaining solids. • Reduction of damage generated by...

Open the catalog to page 2

PUMPING EVOLUTION Manufactured in 316L stainless steel Shaft designed for Kit SIS+ 2* Different port options O-ring options: Buna, Viton & EPDM Internal and balanced mechanical seal 3-A Certified Semi-open impeller Scroll casing with suction in the center. Any QC+ pump can be converted into a SIS+ through two kit options: SIS+1 Kit It is possible to convert a QC+ into a SIS+ pump by replacing the internal seal, back cover, casing gasket, and impeller. *SIS+2 Kit Universally compatible with traditional standard QC/C series, can be transformed into a SIS+ by replacing the internal seal, stuv shaft,...

Open the catalog to page 3

SIS+ Series Gasket B - Buna E - EPDM V - Viton Distributed by: For more information visitwww.qpumps.com [email protected] +52(442) 10331 00

Open the catalog to page 4

SIS+ Series

SIS+ Series

Catalog excerpts

All Q-Pumps catalogs and technical brochures