*mydirectindustry

TAKHI-MP

Product catalog summary

Overview
The TAKHI series by Pyroistech consists of high-power halogen light sources designed for applications in fluorescence, spectroscopy, and general fiber illumination. These sources are compact, user-friendly, and offer a spectral range from visible (VIS) to near-infrared (NIR).

Specifications

Optical Characteristics: The light source features an SMA 905 output connector with a spectral range of 350 - 2250 nm and a typical optical power output of 6.2 mW, measured with a 600µm core diameter optical fiber and a Si photodiode.
Light Bulb Specifications: The bulb operates at 12V/50W DC, with a useful life of 2000 hours, a color temperature of 2900 K, and a luminous flux of 930 lm. It uses a GY6.35 lamp holder.
Electrical Characteristics: The power input is 12 V with a maximum input current of 4.5 A. It includes a DC female 2.1mm connector and comes with an AC/DC adapter (input 100-240V, 50-60Hz).
Other Characteristics: The device operates optimally at temperatures between 15 - 25ºC and humidity below 80% HR. The equipment surface temperature is 42ºC, with a stabilization time of approximately 25 minutes. The dimensions are 10.5 x 11.5 x 8 cm, and it weighs 500 g. Ventilation is provided by two fans.

Operation
Before operation, connect the included power source. The device features a MODE control switch to toggle between ON and OFF. Cooling is facilitated by two fans that support natural convection.

Safety Notes

Do not remove or modify any safety devices, as this voids the warranty and creates safety hazards.
The device contains dangerous currents and has no user-serviceable parts. Only qualified personnel should service it.
Inspect the unit and power supply before first use. Do not use if damaged; contact the dealer for repairs or replacement.
Ensure the source is not covered or airflow obstructed during operation.
Avoid direct eye exposure to the optical radiation emitted by the light source.

Additional Information
Specifications are subject to change without notice. For replacement light bulbs, contact Pyroistech at [email protected].

Catalog excerpts

TAKHI-MP Fiber coupled Halogen Light Source The TAKHI series comprises high power halogen light sources with a spectral range from VIS to NIR. They are conceived as user friendly, compact and being ideal for fluorescence, spectroscopy and general fiber illumination applications. These light sources have been designed to obtain a high coupling efficiency to optical fiber through a SMA connector.

Open the catalog to page 1

Operation Connect a proper power source (included with the light source) prior to operation. The light source includes a MODE control switch on the back. The MODE control switch on the back sets the operation mode between ON (up) and OFF (down). TAKHI has two fans that cool the source by a flow in favor of natural convection. Safety Notes • Do not remove or modify any installed safety device on this equipment. Doing so will void your warranty and create an unsafe operating environment. • Dangerous currents are present in this device. There are NO user serviceable parts inside. • Only allow qualified...

Open the catalog to page 2

TAKHI-MP

TAKHI-MP

Catalog excerpts

All Pyroistech.sl catalogs and technical brochures