*mydirectindustry

TAKHI-HP

Product catalog summary

Overview: The TAKHI-HP is a high-power halogen light source designed for fiber illumination applications, including fluorescence and spectroscopy. It offers a spectral range from visible (VIS) to near-infrared (NIR) and is compact and user-friendly.

Electrical Characteristics: The device operates with a 12V input voltage and a maximum input current of 4.5A. It uses a DC female 2.1mm connector and includes an AC/DC adapter compatible with 100-240V, 50-60Hz inputs.

Optical Characteristics: The light source features an SMA 905 output connector and covers a spectral range of 350 - 2250 nm. It provides a typical optical power output of 9.3 mW, measured with a 600µm core diameter optical fiber and a Si photodiode.

Light Bulb Specifications: The bulb operates at 12V/50W DC, with a useful life of 50 hours, a color temperature of 3300 K, and a luminous flux of 1500 lm. It uses a G6.35 lamp holder.

Other Characteristics: The device operates optimally between 15 - 25ºC with humidity below 80% HR. The equipment surface temperature is 42ºC, and it requires a stabilization time of approximately 25 minutes. The dimensions are 10.5 x 11.5 x 8 cm, and it weighs 500 g, with ventilation provided by two fans.

Spectral Power Distribution: The spectral power distribution is measured using different detectors: Si detector (400 - 900 nm), InGaAs detector (900 - 1600 nm), and TE cooled InGaAs detector (1500 - 2500 nm).

Safety Notes: Users are advised not to remove or modify safety devices, as this voids the warranty and creates safety risks. The device contains dangerous currents and should only be serviced by qualified personnel. Inspect the unit before use, and do not operate if damaged. Avoid covering the source or obstructing airflow during operation. Direct exposure to optical radiation can damage eyes.

Operation: Connect the included power source before operation. The device features a MODE control switch to toggle between ON and OFF. Cooling is facilitated by two fans that support natural convection.

Note: Specifications are subject to change without prior notice.

Catalog excerpts

TAKHI-HP Fiber coupled Halogen Light Source The TAKHI series comprises high power halogen light sources with a spectral range from VIS to NIR. They are conceived as user friendly, compact and being ideal for fluorescence, spectroscopy and general fiber illumination applications. These light sources have been designed to obtain a high coupling efficiency to optical fiber through a SMA connector. (3) AC/DC adapter is included with the source. Input 100-240V , 50-60Hz. Other characteristics Spectral power distribution www.pyroistech.com [email protected]

Open the catalog to page 1

Operation Connect a proper power source (included with the light source) prior to operation. The light source includes a MODE control switch on the back. The MODE control switch on the back sets the operation mode between ON (up) and OFF (down). TAKHI has two fans that cool the source by a flow in favor of natural convection. Safety Notes • Do not remove or modify any installed safety device on this equipment. Doing so will void your warranty and create an unsafe operating environment. • Dangerous currents are present in this device. There are NO user serviceable parts inside. • Only allow qualified...

Open the catalog to page 2

TAKHI-HP

TAKHI-HP

Catalog excerpts

All Pyroistech.sl catalogs and technical brochures