Overview
The COB-365 is a high-power LED light source designed for applications such as fluorescence, spectroscopy, and general fiber illumination. It features a compact, user-friendly design with silent operation and offers high coupling efficiency to optical fibers via a selectable SMA/FC connector. The device can operate in continuous (CW) or pulsed modes.

Electrical Characteristics
- Power Input: 10 - 18 V
- Input Current: 1 A max
- Connector Type: DC female 2.1mm
- Input Signal for Pulsed Mode: 0 - 5 V, 5 mA typ.
- Connector Type: SMA female

Optical Characteristics
- Output Connector: SMA 905/FC
- Peak Wavelength: 365 nm
- Spectral Range FWHM: 12 nm
- Typical Optical Power Output: 11.8 mW

Other Characteristics
- Working Temperature: 0 - 50 ºC
- Humidity: <80% HR
- Equipment Surface Temperature: 40 ºC
- Stabilization Time: 25 min typ.
- Size: 10.5 x 11.5 x 8 cm
- Weight: 500 g

Operation Modes
The device includes a MODE switch for selecting between ON, OFF, and PULSED modes. In ON mode, intensity is adjustable between 20% and 100%. In PULSED mode, intensity is controlled via a PWM signal (0-5 V) with recommended frequencies up to 500 Hz for maximum resolution, though frequencies up to 100 kHz are supported.

Safety Notes
- Do not remove or modify safety devices.
- Only qualified personnel should service the unit.
- Inspect the unit before first use and do not use if damaged.
- Ensure proper ventilation during operation.
- Avoid direct eye exposure to optical radiation.

For more information, visit www.pyroistech.com or contact [email protected].