*mydirectindustry

COB-270

Product catalog summary

Overview
The COB-270 is a fiber-coupled LED light source designed for high power applications ranging from UV to NIR. It is compact, user-friendly, and silent, making it suitable for fluorescence, spectroscopy, and general fiber illumination.

Specifications

Electrical Characteristics: Operates with an AC/DC adapter (100-240V, 50-60Hz). Input voltage is 10-18V with a maximum current of 1A. The pulsed mode requires a 0-5V input signal.
Optical Characteristics: Features an SMA 905/FC output connector with a peak wavelength of 270 nm and a spectral range FWHM of 15 nm. The typical optical power output is 0.12 mW.
Other Characteristics: Operates within a temperature range of 0-50 ºC and humidity below 80% HR. The equipment surface temperature is 40 ºC with a stabilization time of 25 minutes. Dimensions are 10.5 x 11.5 x 8 cm, and it weighs 500 g.

Operation Modes
The device includes a MODE switch for selecting between ON, OFF, and PULSED modes. In ON mode, intensity is adjustable from 20% to 100%. In PULSED mode, intensity is controlled via a PWM signal (0-5V) with recommended frequencies up to 500 Hz for maximum resolution, though it supports up to 100 kHz.

Safety Notes

Do not remove or modify safety devices.
Only qualified personnel should service the unit.
Inspect the unit before first use and do not use if damaged.
Ensure proper ventilation during operation.
Avoid direct eye exposure to optical radiation.

Catalog excerpts

COB-270 Fiber coupled LED Light Source The COB series comprises high power LED light sources with peak wavelengths that range from UV to NIR. They are co nceived as user friendly, compact and silent tools, being ideal for fluorescence, spectroscopy and general fiber illumination applications. These light sources have been designed to obtain a high coupli ng efficiency to optical fiber through a selectable SMA/FC connector. In addition, they can be operated either in continuous (CW) or pulsed modes. (2) Measured with an optical fiber (core diameter 600pm) and a Si photodiode (OPHIR™) www.pyroistech.com [email protected]

Open the catalog to page 1

Operation Modes Connect a proper power source (included with the light source) prior to operation. The light source includes two controls on the front. The MODE switch on the right sets the operation mode between ON (left), OFF (centre) and PULSED (right). The left knob controls the intensity in ON mode (switch on the left position). The intensity can be adjusted between 20% (fully counter-clockwise) and 100% (fully clockwise) of maximum intensity. In PULSED mode (switch on the right position), the intensity can be controlled using a PWM (pulse width modulation) signal through the PWM input connector...

Open the catalog to page 2

COB-270

COB-270

Catalog excerpts

All Pyroistech.sl catalogs and technical brochures