7" CAPACITIVE TOUCH MONITOR RTD2556 (SMALL CASE)

Product catalog summary

Specifications:
The 7" Capacitive Touch Monitor RTD2556 features a 7.0-inch display with a 16:9 aspect ratio and a resolution of 1024 × 600. It offers a brightness of 500 cd/m² and a contrast ratio of 800:1. The LED lifetime is approximately 20,000 hours, and the viewing angles are 160° horizontally and 130° vertically. The monitor uses a Realtek® RTD2556T controller and supports HDMI, DP, and VGA inputs, along with a USB-B touch interface.

Touch Panel:
The monitor includes a projected capacitive 10-point multi-touch panel with a glass thickness of 1.1 mm and an anti-glare surface treatment. It is thermally strengthened and offers IK7 protection.

Environmental Conditions:
The monitor operates within a temperature range of -10°C to 60°C and can be stored between -20°C and 60°C. It supports a humidity range of 10% to 90%.

Certifications:
The device is CE and FCC certified.

Chassis:
The monitor features a small case design with rubber frame sealing, IP65 front protection, and IP40 back protection. The case is made of aluminum with a powder coating in RAL9004 (Black).

Serial (RS232) Pin Definition:
The RS232 interface includes RXD1, TXD1, and multiple GND pins.

Accessories and Power:
The monitor comes with a power adapter (100-240V ACDC, 12V DC-Out) and a USB-Touch cable. It has a working power consumption of 7W and a standby consumption of less than 1W.

Intended Use/Application:
This device is intended for indoor use as a touchscreen display for control panels, digital signage, way-finding, POS, and similar applications. It should be protected from direct sunlight to avoid exceeding temperature limits.

Update Notes:
The current version (v4) includes a modular front and back kit concept, an aluminum back kit, and changes in button location and layout. Previous versions included changes such as switching from a DVI-D connector to a DP connector and updates to the cover glass thickness.

Catalog excerpts

7" CAPACITIVE TOUCH MONITOR RTD2556 (SMALL CASE)-1

7" CAPACITIVE TOUCH MONITOR RTD2556 (SMALL CASE) Pictures show sample configurations, real product may vary. TOUCH PANEL Display Size [inch] Touch Type Projected Capacitive 10-point Multi-touch Aspect Ratio Printing Type Cover Glass Surface Treatement Brightness [cd/m²] Contrast Ratio Printing Color Thermally Strengthened Touch Controller Display Interface Touch Interface Optical Bonding Clear Bond® PC/MONITOR SYSTEM Monitor Controller Monitor Firmware ENVIRONMENTAL CONDITIONS Operation Temperature Storage Temperature Humidity Range USB-B (touch) Serial Port RS232 (RX / TX only) Power On/Off, Decrease Brightness/Left/ Down, Increase Brightness/Right/Up, Menu/ Enter, Input Selection Adjustable Features Brightness, Contrast, Screen Setting, Color Temp, Color Effect, Language, Reset, Auto Adjust (see instruction manual for full details) CHASSIS Case Design Rubber Frame Sealing Case Size Case Color Case Coating Powder Coating Case Material Cut-out for clamp supports L × H [mm] Max. wall thickness for clamp supports [mm] Amount of clamps required Pyramid Computer GmbH is not affiliated with Debian. Debian is a registered trademark owned by Software in the Public Interest, Inc. Pyramid Computer GmbH | Bötzinger Straße 60 | D-79111 Freiburg www. pyramid-computer.com +49 761 4514 0 [email protected] 111023 | ds_2023_FT07TMCAPOB_EN | specification is

Open the catalog to page 1

7" CAPACITIVE TOUCH MONITOR RTD2556 (SMALL CASE)-2

FAYTECH® ACCESSORIES Power Adapter 100-240V ACDC active switching; 12V DC-Out Power Indicator USB-Touch Cable Working Power Short Instruction manual Power Consumption Stand-By Consumption INTENDED USE/APPLICATION The device is to be used as (touchscreen) display for indoor use as control panel, digital signage, way-finding, POS and similar applications. Direct sunlight might increase the device temperature beyond the allowed storage and operation conditions. Therefore the devices must be protected against direct sunlight. Devices operated or stored outside the specified temperature ranges are...

Open the catalog to page 2

7" CAPACITIVE TOUCH MONITOR RTD2556 (SMALL CASE)-3

Pictures show sample configurations, real product may vary. 7" RUBBER FRAME FRONT KIT 10.8 SMALL MONITOR BACK KIT (RTD2566) FAYTECH TECH.CO.,LTD Description Designed Implemented modular front and back kit concept Changed ABS plastic back kit to Aluminum back kit Changed button location and lay-out Designed Checked Pyramid Computer GmbH | Bötzinger Straße 60 | D-79111 Freiburg www. pyramid-computer.com +49 761 4514 0 [email protected] 111023 | ds_2023_FT07TMCAPOB_EN | specification is subject to change

Open the catalog to page 3

7" CAPACITIVE TOUCH MONITOR RTD2556 (SMALL CASE)-4

UPDATE NOTES: Pictures show sample configurations, real product may vary. Switching of the DVI-D connector to a DP connector Minor change in the dimensions Cover glass update from 2mm to 1.1mm Minor change in the dimensions First version Pyramid Computer GmbH | Bötzinger Straße 60 | D-79111 Freiburg www. pyramid-computer.com +49 761 4514 0 [email protected] 111023 | ds_2023_FT07TMCAPOB_EN | specification is subject to change

Open the catalog to page 4