13.3" CAPACITIVE TOUCH MONITOR RTD2556 (SMALL CASE)

Product catalog summary

Specifications:
The 13.3" Capacitive Touch Monitor RTD2556 features a 16:9 aspect ratio with a resolution of 1920 × 1080. It has an active area of 293.76 × 165.24 mm, brightness of 300 cd/m², and a contrast ratio of 800:1. The LED lifetime is 15,000 hours, and it offers a viewing angle of 170° both horizontally and vertically. The display interface is eDP, controlled by Realtek® RTD2556T, and includes a standard firmware. It has built-in 2× 2W loudspeakers and supports HDMI, DP, VGA, Audio In, USB-B (touch), and RS232 serial port connections.

Touch Panel Display:
The monitor uses a projected capacitive 10-point multi-touch system with a touch controller EXC81W84. The touch interface is USB, with resolutions RX 53 and TX 30. It features a 1.1 mm thick glass with AG surface treatment and IK7 protection. The optical bonding is Clear Bond®.

Environmental Conditions:
The monitor operates between -10°C to 60°C and can be stored between -20°C to 60°C. It supports a humidity range of 10% to 90%.

Certifications:
The device is CE and FCC certified.

Chassis:
The case is designed with a rubber frame sealing, made of aluminum with a powder coating in RAL9004 (Black). It has IP65 front protection and IP40 back protection. The case dimensions are 338.2 × 220.7 × 42.3 mm, with a cut-out for clamp supports of 322.0 × 196.0 mm. It supports VESA 100 × 100 mounting.

Serial (RS232) Pin Definition:
The RS232 port includes RXD1, TXD1, and multiple GND pins.

Accessories and Power:
The monitor comes with a power adapter (100-240V ACDC active switching; 12V DC-Out), a USB-Touch cable, and a short instruction manual. It has a green LED power indicator, working power of 12V, power consumption of 8W, and standby consumption of less than 1W.

Weight & Packaging:
The net weight is approximately 3.30 kg, and the gross weight is about 5.20 kg, including packaging. The packaging is made of 100% recyclable cardboard and polyethylene (PE), with dimensions of 495.0 × 310.0 × 80.0 mm.

Intended Use/Application:
The monitor is intended for indoor use as a touchscreen display for control panels, digital signage, way-finding, POS, and similar applications. It should be protected from direct sunlight to avoid exceeding the specified temperature ranges, which are not covered by warranty.

Update Notes:
The current version (v4) implements a modular front and back kit concept, changes the back kit material to aluminum, and modifies button locations and layout.

Catalog excerpts

13.3" CAPACITIVE TOUCH MONITOR RTD2556 (SMALL CASE)-1

13.3" CAPACITIVE TOUCH MONITOR RTD2556 (SMALL CASE) Pictures show sample configurations, real product may vary. TOUCH PANEL Display Size [inch] Touch Type Projected Capacitive 10-point Multi-touch Aspect Ratio Printing Type Cover Glass Surface Treatement Brightness [cd/m²] Contrast Ratio Printing Color Thermally Strengthened Touch Controller Display Interface Touch Interface Optical Bonding Clear Bond® PC/MONITOR SYSTEM Monitor Controller Monitor Firmware ENVIRONMENTAL CONDITIONS Operation Temperature Storage Temperature Humidity Range USB-B (touch) Serial Port RS232 (RX / TX only) Power On/Off, Decrease Brightness/Left/ Down, Increase Brightness/Right/Up, Menu/ Enter, Input Selection Adjustable Features Brightness, Contrast, Screen Setting, Color Temp, Color Effect, Language, Reset, Auto Adjust (see instruction manual for full details) CHASSIS Case Design Rubber Frame Sealing Case Size Case Color Case Coating Powder Coating Case Material Cut-out for clamp supports L × H [mm] Max. wall thickness for clamp supports [mm] Amount of clamps required Pyramid Computer GmbH is not affiliated with Debian. Debian is a registered trademark owned by Software in the Public Interest, Inc. Pyramid Computer GmbH | Bötzinger Straße 60 | D-79111 Freiburg www. pyramid-computer.com +49 761 4514 0 [email protected] 121023 | ds_2023_FT133TMCAPOB_EN | specification is

Open the catalog to page 1

13.3" CAPACITIVE TOUCH MONITOR RTD2556 (SMALL CASE)-2

FAYTECH® ACCESSORIES Power Adapter 100-240V ACDC active switching; 12V DC-Out Power Indicator USB-Touch Cable Working Power Short Instruction manual Power Consumption Stand-By Consumption INTENDED USE/APPLICATION The device is to be used as (touchscreen) display for indoor use as control panel, digital signage, way-finding, POS and similar applications. Direct sunlight might increase the device temperature beyond the allowed storage and operation conditions. Therefore the devices must be protected against direct sunlight. Devices operated or stored outside the specified temperature ranges are...

Open the catalog to page 2

13.3" CAPACITIVE TOUCH MONITOR RTD2556 (SMALL CASE)-3

- sample configurations, real product may vary. Pictures show 13.3" RUBBER FRAME FRONT KIT 87 SMALL MONITOR BACK KIT (RTD2566) Description Designed FAYTECH TECH.CO.,LTD Implemented modular front and back kit concept Changed ABS plastic back kit to Aluminum back kit Changed button location and lay-out Designed Checked Pyramid Computer GmbH | Bötzinger Straße 60 | D-79111 Freiburg www. pyramid-computer.com +49 761 4514 0 [email protected] 121023 | ds_2023_FT133TMCAPOB_EN | specification is subject to change

Open the catalog to page 3

13.3" CAPACITIVE TOUCH MONITOR RTD2556 (SMALL CASE)-4

FAYTECH® UPDATE NOTES: 1 No. Rev. Revisionconfigurations, Record Pictures show sample real Date product may vary. - Switching of the DVI-D connector to a DP connector Added screwholes for the clamp support mounting option faytech Version: First version Designed v1: GL: 3030502603 | EU: 1010501655 jiangfan Scale 1:1 Checked Pyramid Computer GmbH | Bötzinger Straße 60 | D-79111 Freiburg www. pyramid-computer.com +49 761 4514 0 [email protected] 121023 | ds_2023_FT133TMCAPOB_EN | specification is subject to change faytech Description

Open the catalog to page 4