PVD4E11
9Pages

DATA SHEET PROPORTIONAL VALVE DRIVERS PVD4E11 Proportional Valve Driver, two PWM solenoid outputs, environmentally sealed BENEFITS AND FEATURES: • Versatile digital design • WiFi user interface for complete control and status information • Compatible with most internet enabled devices and browsers • Wide range of supply voltage • Electronic limiting circuit / short circuit proof • Load can be connected & disconnected live • Protected against wrong connection • Energy-efficient PWM circuit, no heat sink is required • Current sensing maintains output regardless of changes in supply voltage and coil resistance • Simple control with analog input, 5V/200mA supplied for joystick or other accessories • Can be used either for one dual solenoid valve or for two independent single solenoid valves SPECIFICATIONS: • Operating voltage: 9 - 36VDC • Maximum output current: 4A • Ramp time: 0.0 to 1000.0s • Linearity: 0.5% • PWM / Dither frequency: 33-1000Hz • Operating temperature: -40° to +80° Celsius • Input signals: up to (+/-)10V and/or 20mA • Mating connector: Deutsch DT06-12SA or Amphenol AT06-12SA • Ratings: connector IP67, epoxy UL 94HB, Contains FCC ID: 2AHMR-ESP12S • Size: 4.0" x 2.1" x 1.9" PWM Controls User Interface Data Sheet Monitor PWM Controls Inc. | info@pwmcontrols.com | www.pwmcontrols.com tel +1 905 542 1245 | fax +1 866 591 3484

CONFIGURATION. The driver can be used: for two single solenoid valves, controlled by two independent analogue signals or for one dual solenoid valve, controlled by one analogue signal or by the difference between two analogue signals. INPUTS: milliamp signal 0 to 21.99mA or any subrange thereof, applied to IN1(A or B) while IN2(A or B) accepts ON/OFF signal voltage signal 0 to 10.99V or any subrange thereof, applied to (IN2 - IN3)(A or B) while IN1(A or B) accepts ON/OFF signal ON/OFF signal functions: Alternate Output Range, Enable Output or Disable Ramps See wiring diagrams to the...

configuration and wiring diagram example 1.4 for two independent single solenoid valves: potentiometer and output enable switch for valve A 4-20mA signal and ramp disable switch for valve B Alternate Output Range 0.40 to Ramp Up Ramp Down PWM Frequency IN1A Function__Enable Output Alternate Output Range 0.40 to Ramp Up Ramp Down PWM Frequency IN2B Function Disable Ramps PWM Controlslnc. | info@pwmcontrols.com | www.pwmcontrols.com tel +1 905 542 1245 | fax +1 866 591 3484

30.0 s 15.0 s 140 Hz Alternate Output Range configuration and wiring diagram example 1.5 for two independent single solenoid valves: two switches to select one of four presets for each valve IN2A Range Solenoid A Input selection Output Range Alternate Output Range Ramp Up Ramp Down PWM Frequency IN1A Function_ IN2B Range Solenoid B Input selection Output Range Alternate Output Range Ramp Up Ramp Down PWM Frequency I NIB Function PWM Controlslnc. | info@pwmcontrols.com | www.pwmcontrols.com tel +1 905 542 1245 | fax +1 866 591 3484

IN2A Range Solenoid A Input selection Output Range Alternate Output Range Ramp Up Ramp Down PWM Frequency IN1A Function_ IN2B Range Solenoid B Input selection Output Range Alternate Output Range Ramp Up Ramp Down PWM Frequency I NIB Function configuration and wiring diagram example 2.4 for dual solenoid valve: -10V to +10V signal and low/high range switch 1.0 s 1.0 s 150 Hz Alternate Output Range PWM Controlslnc. | info@pwmcontrols.com | www.pwmcontrols.com tel +1 905 542 1245 | fax +1 866 591 3484

configuration and wiring diagram example 3.4 for dual solenoid valve: 0-10V signal and enable switch duty cycle output Alternate Output Range 5.0 to Ramp Up Ramp Down PWM Frequency IN1A Function__Enable Output Alternate Output Range 95.0 to Ramp Up Ramp Down PWM Frequency IN1B Function Enable Output PWM Controlslnc. | info@pwmcontrols.com | www.pwmcontrols.com tel +1 905 542 1245 | fax +1 866 591 3484

IN2A Range Solenoid A Input selection Output Range Alternate Output Range Ramp Up Ramp Down PWM Frequency IN1A Function_ IN2A Range Solenoid B Input selection Output Range Alternate Output Range Ramp Up Ramp Down PWM Frequency I NIB Function configuration and wiring diagram example 4.4 for two dual solenoid valves: two-axis hall effectjoystick and low/high range switch 0.5 s 0.5 s 200 Hz Alternate Output Range PWM Controlslnc. | info@pwmcontrols.com | www.pwmcontrols.com tel +1 905 542 1245 | fax +1 866 591 3484

configuration and wiring diagram example 5.4 for bipolarvoice coil / servovalve: potentiometer and ramp disable switch IN2A Range Solenoid A Input selection Output Range Alternate Output Range Ramp Up Ramp Down PWM Frequency IN1A Function_ IN2A Range Solenoid B Input selection Output Range Alternate Output Range Ramp Up Ramp Down PWM Frequency I NIB Function PWM Controlslnc. | info@pwmcontrols.com | www.pwmcontrols.com tel +1 905 542 1245 | fax +1 866 591 3484

configuration and wiring diagram example 6.5 for basic closed loop with single solenoid valve potentiometersignal and 2-wire transmitterfeedback one enable switch Solenoid A Input selection INA-INB Alternate Output Range 0.40 to Ramp Up Ramp Down PWM Frequency IN1A Function__Enable Output INIBRange ^ to Solenoid B Input selection INB- IN A Alternate Output Range 2.50 to Ramp Up Ramp Down PWM Frequency IN2BFunction Unused PWM Controlslnc. | info@pwmcontrols.com | www.pwmcontrols.com tel +1 905 542 1245 | fax +1 866 591 3484