PVD3X2E
3Pages

PVD3X2E Data Sheet Revised Monday 2011 November 07, page 1 of 3 Proportional Valve Drivers PVD3X2E, Proportional Valve Driver, dual PWM solenoid outputs, epoxy potted Benefits and Features: • • • • • • • • • • Versatile digital design Large, easy-to-use adjustments and 3-digit seven-segment LED display Wide range of supply voltage Electronic limiting circuit / short circuit proof Load can be connected & disconnected live Protected against wrong connection Simple control with analog input Can be used for one dual solenoid proportional valve Energy efficient PWM circuit, no heat sink is required Current sensing maintains output regardless of changes in supply voltage and coil resistance Operating voltage: 9 - 35VDC Maximum output: 3A Ramp time: 0.0 to 99.5s Linearity: 0.5% Protection grade: IP67 Input signal: differential -10V to +10V PWM / Dither frequency: 50-500Hz Operating temperature: -40° to +75° Celsius Size: 3.00” x 0.875” x 3.25” (4.00” with flanges) 67 PWM Controls Inc., 1205 Walnut Street, Victoria, BC, CANADA V8T1N3 tel +1 905 542 1245 fax +1 866 591 3484 pwmcontrols.com

PVD3X2E Data Sheet Revised Monday 2011 November 07, page 2 of 3 high, output current corresponding to the highest input, in Amps jog, used to simulate signal, in Amps low, output current corresponding to the lowest input, in Amps ramp up, time required for the output to increase from ALO to AHI, in seconds ramp down, time req’d for the output to decrease from AHI to ALO, in seconds deadband, output is disabled when signal is less than this setting, in % high, output current corresponding to the highest input, in Amps jog, used to simulate signal, in Amps low, output current corresponding to...

Functional diagram, dual solenoid proportional valve: Data Sheet Revised Monday 2011 November 07, page 3 of 3 Wiring diagram: PWM Controls Inc., 1205 Walnut Street, Victoria, BC, CANADA V8T1N3