*mydirectindustry

PVD3S1R

Product catalog summary

Product Overview:
PVD3S1R is a Proportional Valve Driver with one PWM solenoid output, designed for use in an open board DIN rail card holder. It features a versatile digital design with easy-to-use adjustments and a three-digit seven-segment LED display.

Benefits and Features:

Wide range of supply voltage and electronic limiting circuit for short circuit protection.
Load can be connected and disconnected live, with protection against incorrect connections.
Energy-efficient PWM circuit eliminates the need for a heat sink.
Current sensing maintains output stability despite changes in supply voltage and coil resistance.

Specifications:

Operating voltage: 9 - 35VDC
Maximum output: 3A
Ramp time: 0.0 to 99.5 seconds
Linearity: 0.5%
Input signal: Two digital (on/off), 0/24V
PWM/Dither frequency: 50-500Hz
Operating temperature: -40° to +75° Celsius
Size: 3.50” x 2.75” x 2.00”

Settings and Range:

J9 Jog: 0.00 to 3.00 A
P1 to P4 Set points: 0.00 to 3.00 A
Ramp up/down time: 00.0 to 99.5 seconds
Dither frequency: 050 to 500 Hz
Display orientation: Normal or upside-down
SA: Save settings

Set-Up Procedure:
At power-up, the left side control allows reading of the target set point or actual solenoid output current in Amps. To enter set-up mode, rotate the right side control to sequentially display settings: J9, P1, P2, P3, P4, UP, dn, dF, di, and SA. Adjust settings by rotating to the desired value. To save new settings, rotate until SA is displayed and rotate one full turn. To discard changes, power down without saving.

Wiring Diagram:
The wiring diagram provides guidance on connecting inputs and outputs, with options for different set points and configurations.

Note: PWM Controls Inc. reserves the right to discontinue models or change specifications without notice or obligation.

Catalog excerpts

PVD3S1R PVD3S1R, Proportional Valve Driver, one PWM solenoid output, open board in DIN rail card holder Versatile digital design Large, easy-to-use adjustments and three-digit seven-segment LED display Wide range of supply voltage Electronic limiting circuit / short circuit proof Load can be connected & disconnected live Protected against wrong connection Simple control with two digital inputs Energy-efficient PWM circuit, no heat sink is required Current sensing maintains output regardless of changes in supply voltage and coil resistance Operating voltage: 9 - 35VDC Maximum output: 3A Ramp time: 0.0 to 99.5s Linearity: 0.5% Input signal: two digital (on/off), 0/24V PWM / Dither frequency: 50-500Hz Operating temperature: -40° to +75° Celsius Size: 3.50” x 2.75” x 2.00” PWM CONTROLS INC. | 1205 WALNUT ST, VICTORIA, BRITISH COLUMBIA CANADA V8T 1N3 tel +1 905 542 1245 fax +1 866 591 3484 pwmcontrols.com

Open the catalog to page 1

PROPORTIONAL VALVE DRIVERS PVD3S1R, Proportional Valve Driver, one PWM solenoid output, open board in DIN rail card holder u9 Jog, used to simulate signal, to 3.00 A UP Ramp up, time required for the output to increase 1 A, □□.□ to 99.5 s dn Ramp down, time required for the output to decrease 1 A, □□.□ to 99.5 s di Display orientation, normal or up-side-down SET-UP PROCEDURE: At power up, you may rotate the left side control # to read the target set point or the actual solenoid output current directly in Amps: in (target), ob (actual). To enter set-up mode, rotate right side control ; the display...

Open the catalog to page 2

PROPORTIONAL VALVE DRIVERS PVD3S1R, Proportional Valve Driver, one PWM solenoid output, open board in DIN rail card holder WIRING DIAGRAM: PWM CONTROLS INC. | 1205 WALNUT ST, VICTORIA, BRITISH COLUMBIA CANADA V8T 1N3

Open the catalog to page 3

All PWM Controls Inc. catalogs and technical brochures

Archived catalogs

PVD3D1R Proportional Valve Driver
3 Pages
PVD3D10 Proportional Valve Driver
4 Pages