Data Sheet MEM 16 www.pwb-encoders.com precision works better Incremental Encoder Magnetic PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 [email protected] www.pwb-encoders.com PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany [email protected] / www.pwb-encoders.com

Data Sheet MEM 16 www.pwb-encoders.com precision works better Description The MEM 16 is a magnetic incremental encoder. He is a reliable low cost hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder is developed for brushless motors, motor feedback applications and rotational speed control. The MEM 16 is a real time system for high speed applications and rough environments. The encoder provides two square wave outputs in quadrature (90 degrees phase shifted) for counting and direction information. The resolution of the encoder is determined...

Data Sheet MEM 16 www.pwb-encoders.com precision works better Recommended operating conditions Electrical characteristics are only effective for the range of the operating temperatures. Typical values at 25 °C and VCC = 5 VDC. Parameter Supply voltage Supply current Output current per channel High level output voltage Low level output voltage Rise time Fall time Pulse width Phase shift Absolute angular accuracy Load capacitance Count frequency Operating temperature Storage temperature [n = bits] ± 0,32 e depended on resolution Humidity exposure Magnet axis displacement PWB encoders GmbH RESTRICTED...

Data Sheet MEM 16 www.pwb-encoders.com precision works better Electrical interface Cable Wire color red yellow black purple Definitions Counts per Revolution (CPR): The number of bar and window pairs or increments per revolution of the code wheel. One Cycle (C): 360 electrical degrees (°e), one period of the signal, caused by one pair of bar and window. Pulse Width (P): The number of electrical degrees that an output is high during one cycle. This value is nominally 180 ºe. State Width (S): The number of electrical degrees between a transition in the output of channel A and the neighbouring transition...

Data Sheet MEM 16 www.pwb-encoders.com precision works better Mechanical specifications Parameter Outer dimensions connector version Required shaft length LW Max. allowable axial shaft play of motor Max. allowable radial shaft play of motor Mounting screw size (DIN 84) Tightening torque of the screws Pitch circle diameter Øc Flange bore diameter diameter Øz Mounting boss diameter Øm Max. mounting boss height hZ Mating connector (Molex) Total weight Moment of inertia of the hub with the code wheel Protection grade according to DIN 40500 Mounting considerations: The MEM 16 encoder is designed to...

Data Sheet MEM 16 www.pwb-encoders.com precision works better Ordering information Ordering code: Encoder Output I : Inkremental Number of Channels 2 : 2 Channel Motor Shaft Diameter A : 1,500 mm B : 2,000 mm C : 2,500 mm D : 3,000 mm E : 3.175 mm Performance S : Standard E : Extended * Output option LF : connector without cable LS : connector + standard cable * customer version Available accessories see page 9 (no parts of standard delivery): - cable 300 mm length (UL1061 / AWG28) - adapter plates for different motors - centering and assembly gauge for different motor shafts - fastening screws...

Data Sheet MEM 16 www.pwb-encoders.com precision works better Align the base plate to the motor shaft by using the centering gauge Set the base plate onto the motor , Afterwards fix the base plate to the motor flange using two screws Remove the centering gauge Set the hub with magnet into the centering gauge Press the hub with magnet onto the motor shaft by the centering gauge PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany [email protected] / www.pwb-encoders.com

Data Sheet MEM 16 www.pwb-encoders.com precision works better Press the centering gauge down to the final position Afterwards remove the centering gauge Align the housing to the base plate, slide the housing onto the base plate Turn the housing into its final position, the encoder is now ready for use Press the housing into the final position Do not rotate and pull out the encoder after assembly or when it is in operation. PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany [email protected] / www.pwb-encoders.com

Data Sheet MEM 16 www.pwb-encoders.com precision works better Available accessories Standard cable length 300 mm (UL 1061 / AWG 28) Centering and assembly gauge for centering the base plate on the motor flange or an adapter plate and also positioning the magnet Screws DIN84 M1.6 X 3 or M1.6 X 4 Customized adapter plate IMPORTANT NOTICE The encoder is so designed that it may be assembled only one time, otherwise the guarantee will be voided. The guarantee will be voided by misuse, accident, modification, unsuitable physical or operating environment, operation in other than the specified operating...