AE 30 VX
9Pages

data sheet AE30-VX www.pwb-encoders.com Motion Control Solutions PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com www.pwb-encoders.com PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany info@pwb-encoders.com / www.pwb-encoders.com

data sheet AE30-VX www.pwb-encoders.com Motion Control Solutions Operating conditions Parameter Operating temperature Supply voltage Supply current Output voltage Output current Encoder characteristic Encoding characteristics over recommended operating range and recommended mounting tolerances unless otherwise specified. Pulse width error State width error Phase error Pin-out description Power supply red green blue purple brown yellow white black ESD Warning: Normal handling precautions should be taken to avoid static discharge damage to the sensor. AE30_VX_Rev. 2 / 28.05.2019 PWB encoders...

data sheet AE30-VX www.pwb-encoders.com Motion Control Solutions Mechanical characteristics and drawings Parameter Dimensions Weight Shaft diameters Ø Motor shaft length protrusion L Max. motor mounting boss diameter D Max. motor mounting boss height H Max. motor axial shaft play 9.5 (see Fig.2 below) 13.0 (see Fig.2 below) 2.0 (see Fig.2 below) Max. motor shaft eccentricity + radial play 2 X M3 (DIN 965) 3 X M2 (DIN 7985) 15 Refer to Fig.3 below IP50 (according to DIN 40500)* PBT, 17% glass fibre reinforced UL 94 V-0 Screws for fixing Tightening torque of the screws Flange print Protection...

data sheet AE30-VX www.pwb-encoders.com Motion Control Solutions AE30 MOUNTING INSTRUCTION Align the base plate to the motor shaft by using the centering gauge Afterwards fix the base plate to the motor flange using two screws (M3) or three screws (M2) When the encoder fits totally onto the flange, start to rotate the encoder clockwise4...4. Align the hole of the hub to the motor shaft and push the encoder until it will touch the flange 4444 until a stop point is reached After assembling the encoder on the flange, remove the stopper. PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany...

data sheet AE30-VX www.pwb-encoders.com Motion Control Solutions AE30 MOUNTING INSTRUCTION Push the wall into the housing into its final position. Do not rotate the encoder after assembly or when it is in operation. Do not pull out the wall after assembly or when it is in operation. ATTENTION! The encoder is designed to be assembled only one time, otherwise the guarantee will be voided. Note: see IMPORTANT NOTICE (page 9) PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany info@pwb-encoders.com / www.pwb-encoders.com

data sheet AE30-VX www.pwb-encoders.com Motion Control Solutions Available accessories Standard cable Cable 300 mm length UL 10002 / AWG28 with female housing connector: Wennmacher CX-H-125-8 with CX-T125F terminals Adapter cable Twisted adapter cable 500 mm length UL10002 / AWG28 with female housing connector: 8-pin Wennmacher connector (Wennmacher CX-H-125-8 Housing with CX-T125F terminals) to a 10-pin Molex connector (Molex 90142-0010 Housing with 90119-2121 terminals) Pin-out description 10 pin connector side Pin Output pin Description 1 2 Not connected Power supply Ground Not connected...

data sheet AE30-VX www.pwb-encoders.com Motion Control Solutions Available accessories Customized adapter plate Centering gauge for different motor shafts PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany info@pwb-encoders.com / www.pwb-encoders.com

data sheet AE30-VX www.pwb-encoders.com Motion Control Solutions Ordering codes Supply voltage Output type Tenperature range M2 : medium (-40°C to 85°C) Connector version S: side connector w ith out cable adapter cable ** standard cable ** Available accessories (no parts of standard delivery): - standard cable 300 mm length - adapter cable 500 mm length - adapter plates for different motors - centering gauge for different motor shafts (highly recommended for correct assembly) - fastening screws 3pcs DIN 7985 M2 X 8 - fastening screws 2pcs DIN 965 M3 X 8 PWB encoders GmbH RESTRICTED THIS...

data sheet AE30-VX www.pwb-encoders.com Motion Control Solutions IMPORTANT NOTICE The encoder is so designed that it may be assembled only one time, otherwise the guarantee will be voided. The guarantee will be voided by misuse, accident, modification, unsuitable physical or operating environment, operation in other than the specified operating environment, or failure caused by a product for which PWB encoders GmbH is not responsible. PWB encoders GmbH reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services also...